Manufacturing Jobs at Volkswagen, Pune
Volkswagen is not only our name, but also our standard: Volkswagen became number one in the European Car Market decades ago and continues to do so through exceptional value for money and premium products, which are reliable and of high quality
To achieve this position in the Indian market within a short period of time and to capture the heart of the Indian customers, we need talented, committed, qualified and high performing people to run our facility at Pune.
To be a part of this success story apply now!
- Production: Sr.Manager/Manager – Paint Shop (SMPS-01); Body shop/Weld shop (SMP -01)
Graduate Engg (8-15 Yrs)Diploma Egg. (12-15 Yrs) of experience In automobile Industry. Candidates should have strong knowledge of problem solving techniques, Process knowledge, concept of Material flow Management Developing Standard Operation & Work Instruction Sheet, QMS/EMS. technical drawing Safe Operating Process Productivity Improvement, Cost Reduction Initiatives, strong focus on Quality improvement, able to handle a team of 200 people & possess good leadership quality with following specific expertise: SMPS-G1 Sound knowledge & know how of Paint Shop processes experience of handling one shift Independently; able to manage a large team tin quality; cast and &li ma. SM 55-01 Sound knowledge of complete welding process, operations, fixtures, equipments and technology, experience of handling one shift independently able to manage a large team for quality; cast and delivery targets
- Logistics: Officer/ Assistant Manager – Disposition ( LGD-01)
Graduate/Diploma Engg . with 3-8 years of experience in automobile industry having detailed knowledge and hands on experience on procurement of local and imported parts, Inventor y & Warehouse Management, material flow activities and – follow-up , continuous follow up in JIT and JIS deliver parts
- Logistics: Officer/ Assistant Manager – Planning ( LP-01)
Graduate/Diploma in Engg. with 3-8 years of experience in automobile industry having detailed knowledge and hands on experience in Logistics Planning, Material Flow concept, Warehouse Management /Structure Packaging Concepts, scheduling of parts , – follow-up with JIT Suppliers , Process Updation and Optimization for JIT Parts, coordination with service providers, working experience in handling – in-bound logistics, preparation of master layouts, processes, master data preparation & part master maintenance.
- SAP-All module MM/WM/FICO/SD/PM/HR: Consultant/Manager (ITSAP – 04)
BE/MCA/MBA IT with mm. 3÷ years experience in any of the SAP modules like MM/ WM/FICO/SD/PM/HR/BI. Should have done 2 E2E implementations . SAP Certified preferred.
- Supplier Quality: Manager/ assistant Manager- Body Shop (QBS-01), Assembly Shop (QAS-01) and Measurement Room (QMR-01)
Graduate Engg . ( 8-10 Yrs) for manager position and diploma (7-10 Yrs) or graduate (4-6 Yrs) for assistant manager in automobile industry (Car OEM/Tier I Supplier) having knowledge of MS Office, SPC SQC, TPM, ISO TS 16949, VDA & 7QCT with following specific expertise: Coordination of sample parts approval, identifying and resolving parts quality problem, optimization of the part and its continuous improvement and problem solving.
01 QPP-01 Interior/Exterior
02 QPP-02 Electrical
03 QPP-03 Sheet Metal
04 QPP-04 Power train/Chassis
- Operation Quality: Officer/Assistant Manager- Operations Analysis (QPA-01)
Graduate Engg . (2-5 Yrs)/Diploma Engg . (6-12 Yrs) of experience in passenger car manufacturing company having knowledge of complete vehicle assembly & parts, problem solving skills, analysis using different quality tools. Knowledge of Project Planning, monitoring and scheduling skiffs, identification of requirement of resources such as manpower, equipment, budget and launch support for new projects.
- Graduate Trainee Engineer (GET-01)
Graduate Engineer in Paint/ Chemical/ Mechanical/Production/Automobile/ Electrical/ Electronics from reputed engineering college, passing out year 2010. Must have 60 marks in academics throughout their career
- Diploma Trainee Engineer ( DET -01)
Diploma Engineer in Paint/ Mechanical/ Automobile/ Electrical/ Electronics from reputed college, passing out year 2010
- Production Shop Floor IT Systems: Assistant Manager (ITIN-05)
BE/MCA/MBA IT with minimum 4+ years experience in handling production & shop floor IT Application. Data Acquisition Systems and communication interfaces with Programmable Logical Controllers (PLC). Good understanding of databases and corresponding programming languages in MSSQL,MYSQL, ORACLE etc., engines. Should be capable of programming in PHP and HTML. Basic troubleshooting &support of operating systems such as AIX/UNIX/Windows & hardware
Candidates who wish to apply for Purchase, Finance, Manufacturing Engineering and HR positions should send their profiles on the mentioned email address, mentioning their area in the subject line (i.e Finance, HR etc.)
send in your applications on recruitment.india@volkswagen.co.in or to The HR & Admin, Volkswagen India Pvt. Ltd., e-1, MIDC Industrial area (PhaseIII), Nigoje Mhalunge, Tal – Khed, Dist – Chakan, Pune-410501
Note: Kindly mention the’position code” in subject line while sending your applications otherwise it may not be processed
- Engineering Jobs at Seco Tools India Limited, Pune (1.000)
- Sales and Marketing Jobs at Finolex, Pune and Roorkee (1.000)
- Uppercrest Job Fair in Pune on the 12th and 13th March 2011 (1.000)
- Engineering, HR, Finance Jobs, Purchase Jobs at Bharat Forge, Pune (1.000)
- Purchase Officer Jobs at Rathi Steel Group, Noida (0.595)
- Multiple Jobs at Steel Forging Unit, Ghaziabad (0.595)
- Multiple Jobs at Sterlite Industries, Tuticorin (0.595)
- Production Jobs at Vignyan Industries Limited, Bangalore (RANDOM - 0.595)
January 2nd, 2011 at 6:28 pm
CURRICULAM VITTAE
RAMKUMAR.B rk051288@gmail.com
13/34b,gurram seshaiya chetty st, cellno:91-9762220938
Pichanoorpet,
Gudiyatham pin:632 602
Vellore distirict,
Tamil Nadu.
Career Objective
Seeking a position to utilize my skills and abilities in the Industry, which offers professional growth while being resourceful, innovative and flexible.
Education Qualification
Diploma in Automobile Engineering Rajagopal Polytechnic College, GudiyattamVellore Dist, with 87.5% aggregate(2007-2010).
SSLC in Thiruvalluvar Hr secondary school gudiyatham,Vellore Dist, with 54% aggregate(2005)
HSC in Thiruvalluvar Hr secondary School ,gudiyatham,Vellore Dist, with 60%aggregate(2006)
Work description
To operate the CNC MACHINCES
Knowledge in TPM
Extra Curricular
AUTO-CAD
Special Machine Techniques
Two and three wheeler technology
Language Known
English
Hindi
Tamil
Personal Strengths
Self-Motivated and Committed.
Flexibility and Adaptability.
Willingness to learn more.
Honesty and Patience.
Personal Profile:
Father’s Name Mr.g.Bhaskar
Date Of Birth 05.12.1988
Gender Male
Marital Status Single
Nationality Indian
Address
13/34b,gurram seshaiya chettyst, Pichanoorpet,
Gudiyatham pin:632 602
Vellore distirict,
Tamil Nadu.
.
Declaration
I here by declare that all the information furnished above are true and correct to the best of my knowledge.
Place: (RAMKUMAR.B )
Date :
January 2nd, 2011 at 10:33 pm
bio data
sir pradeep s dange completed diploma in automobile engg
sslc-1999& diploma automobile engg-2005 job profile:
work exprince-machine-2005to2007 in maruti suzki ltd sai service station {lower parel mumbai}, service adviser -2007to2008may general motors body shop bellad service dealer dharward, servive adviser-2008-2009dec hubli in service department ,customer relation manager hubli 2010 till date
date of birth 14/12/1981
gender male
addres
pradeep s dange
navanager mig 346
hubli pin 58025
karanatak
cellno:9686687004/9481931079
declaration
ihere by declare that all the infromation furnished above are true & correct to the best of my knowledge
thanking you
with regards
pradeep s dange
January 8th, 2011 at 12:47 pm
hi
January 14th, 2011 at 6:04 pm
DEAR SIR:
Am an engineerin graduate with an speacilization of electronics and communication engneering. right now searching for the better oppurtnity in material planning and logistical field.. i have 3 years experience in mp&l .. kindly send me your feed back to my mail thanks
January 22nd, 2011 at 4:55 am
respected sir
I am completed diploma in mechanical eng. and i am interested to work in auto industries like volkswagen for improve my talent which littile bit helps for our organisation.
February 1st, 2011 at 11:57 am
respected sir
I am diploma in mechanical engg + b.tech in mechanical engg working as purchase engg in an textile industry and i am interested to work in auto industries like volkswagen so plz suggest me some solution for getting job. i will be thank full to you sir.
March 4th, 2011 at 7:35 pm
kartika behera Says:
march 04, 2011 at 10:33 pm
bio data
sir kartika behera completed diploma in mechanical engg
sslc-1999& diploma mechanical engg-2004
job profile:
work exprince-machine-1) Presently working in Mutual Industries Ltd. Pune as “Project Quality engineer and Development” from 01 March 09 to till Date. In Quality Assurance Dept.2) I was working in TATA Motors LTD in PIMPRI (PUNE). As a Sr.Quality Engineer QA Dept on assly line. from 01 Aug 07 to 25 Feb 09.3) I was working in DIVGI WARNER LTD BHOSARI (PUNE). As a Quality engineer in QA dept.from 17th Feb 2006 to 27th July 2007.4) I was working in RUPALI APPLIANCE LTD BHANDUP(MUMBAI).As a Quality engineer in QA dept.from 25 Jan 2005 to 5th feb 2006.
date of birth 02/09/1984
gender male
addres
Kartika Behera
AT- Sanabaragam,PO- P.Nimina
VIA- Polasara,DIST- Ganjam (ORISSA)
Pin No – 761105
cellno:9960154705/8983045635
all declaration i here by declare that all the infromation furnished above are true & correct to the best of my knowledge
thanking you
with regards
Kartika Behera
March 15th, 2011 at 3:55 pm
I am Having Qualificatio B.Sc. ( Chemistry),Diploma in Mechanical Engineering, Diploma in Business managment.
Having 30 + Years expierience in Product Development & Supply Chain Managment from Reputed companies Like TATA MOTOTRS, SPICER India Ltd.
Expertisation insheet metal Parts & fabricated assemblies with precision machining of castings & forgings required for automobile agrigates like
April 15th, 2011 at 10:34 am
DEEPAK BALASAHEB KUSHARE. 9657463020
Curriculum Vitae
DEEPAK BALASAHEB KUSHARE.
Mauli Niwas, Got.no.196,
Plot No. 165, Shramik Nagar,
Satpur, Nashik 422007,
Maharashtra, India.
E-Mail: deepak_kushare108@rediffmail.com
OBJECTIVE:
To be associated with a professionally managed organization having committed & dedicated professionally that will add value to my personality at every step and willing to work in challenging & creative environment where my technical knowledge & skills can suitably be utilized & improved with the best possible results.
Work Experience:
Duration : Dec 15th 2009 To Till Date
Organisation : M / s, Suvidh Engineering Industries
Organisation having turnover about 20 corore. It’s a manufacturing of automobiles part & welding assemblies. For various companies like Mahindra & Mahindra all automotive plant, Greaves Cotton, Reamson Industries, based on load schedule, function description & specifications provided by customers.
Designation : QA / PPC
Responsibility : QA
Preparation of MPPAP documentation.
Customer relationship being QUALITY.
Daily analysis of rejection.( at our end with supplier )
Responsible for the Incoming Inspection of all Raw Material along with all Quality Reports.
Maintaining SCAP and MOM with suppliers for any rejection and monitoring upto
new implementation.
Resolving customer complaints in Quality aspect.
Monitoring the Production of Vendor by visiting their Plant regularly.
DEEPAK BALASAHEB KUSHARE 9657463020
Responsibility : PPC (Production Planning & Control) :
Schedule / Raw-Metrial / Urgency / WIP / FG Stock (at our end with customer end ) / Dilevery there are monitoring at 24/7 in my self prepared excel programe.
Monthly Production planning & scheduling with PPC Department.
Vendor Development & Evaluation of BOP Vendors.
Duration : June 15th 2008 to Dec 2009
Organisation : Garge Bandhu
Organisation having turnover about 2 corore. It’s a manufacturing of automobiles part & welding assemblies. For various companies like Mahindra & Mahindra, Relible Autotech Pvt Ltd, D G Corporation Supreme Auto shell Ind. Pvt. Ltd. Etc based on load schedule, Function description & specifications provided by customers.
Designation : QA / QC
Responsibility:
Preparation of PPAP Documentation.
Customer Relationship being Quality & dispatch.
Daily analysis of production report, losses, operator efficiency.
Doing daily production planning.
Daily communication with byour being daily dispatch, schedule.
Item wise stock statement minimum & maximum stock maintain.
In-house monthly inventory of finish goods.
Preparation monthly / weekly requirements plan of dispatch material.
Monitoring scrap generation & material rejection record.
Control to Bout out material, in process & finished gods material stock & working in decided area. Supplier development & preparation of supplier monthly / weekly schedule plan.
Duration : Nov, 2005 to Nov, 2007
Organisation : Suvarna Industries
Organisation having turnover about 16 corore. It’s a manufacturing of automobiles part & welding assemblies. for various companies like Coparo Maruti Ind. Ltd. Lear Setting Ind. Pvt. Ltd. Etc based on load schedule, Function description & specifications provided by customers.
Designation : Quality Inspector.
DEEPAK BALASAHEB KUSHARE 9657463020
Responsibility :
Receiving Inspection, in process Inspection, Final Inspection report maintain to record.
Preparation of PPAP documentation.
Preparation of trend charge.
Record of quality documents for provider, vendor & customer.
Training to operator & worker being control in quality & make a production minimum cost.
Minimization of customer complaint & follow to process for customer satisfaction with implementation in quality system & self developments.
Duration : Oct, 2004 to Oct, 2005
Organisation : CEAT INDIA LTD.
It’s a manufacturing of vehicle tyre Organisation largest in market.
Designation : Maintenance Fitter.
Responsibility:
Forklift Maintenance.
Pallet truck Maintenance.
Educational Qualification :
Secondary School Certificate from Maharastra State Pune Board March 1999 with second class (58.48 %)
Technical Qualifications:
ITI – Fitter from Delhi Board July 2002 with first class (73.85 %)
MS Office From Nashik March 2004 .with Distinction
Personal Details:
Date of birth : July 18th 1984
Gender : Male.
Marital Status : Married.
Address : Mauli Niwas Plote No: 165 / Got No: 195, Near Shri Saptashrungi Devi
Temple, Parth Palace 60ft Road, Shramik Nagar, Satpur, Nashik-422007.
I would like to mention that, throughout my career I got DISTINCTION & have been consistently striving excellence in my life. I would like to become vibrant team member in esteemed organization.
Hereby I am enclosing my resume for your perusal.
Given the chance would prove my worth.
Thanking you,
Deepak Balasaheb Kushare
May 30th, 2011 at 3:09 pm
CURRICULUM VITAE
Email:arvindsharma40@yahoo.co.in
Address: P-129, Mohan Nagar, Uttam Nagar
New Delhi –110059
ARVIND SHARMA
Contact: 9999505090, 9968407832
CAREER OBJECTIVE
A suitable position in a forward-looking organization to contribute and learn by undertaking interesting and challenging tasks.
EDUCATIONAL CREDENTIALS
10th Passed From CBSE Board in 2002
12th Passed From CBSE Board in 2004
B.Com Passed from Delhi University in 2007.
TECHNICAL EDUCATIONAL CREDENTIALS
? 2 Years Certificate Course ITI PASSED in AUTOMOBILE TRADE from TILAK NAGAR
?
? Diploma in Automobile Engineering from Pusa Polytechnic.( result awaited)
SCHOLERSHIP HOLDER:
? 1st Position in Scholarship Examination in ITI.
COMPUTER SKILL
? Knowledge of Computer Basic, M.S.Office
? Working on Internet, E-mail working, Outlook Express.
WORKING EXPERIENCE
AS A SERVICE ADVIOSR
AUTO VIKAS PVT. LTD.
Organization : GMI PVT. LTD.
Period : 1 JULY 2007 TO TILL DATE
RING ROAD HONDA
Organization : RING ROAD HONDA
Period : 1 YEAR
AS A TECHNICAN
Organization : Nissan moto ltd
Period : one year
KEY ROLES as service advisor
? Providing efficient and helpful assistance to service customers.?
? Securing and developing regular customer relations.
? Creating customer appointments and scheduling according to workshop capacity.
? Receiving customer’s car for Service. Ensuring customer mobility.
? Preparing Job / Repair orders for workshop and follow the working process, including
customer contact for approving additional work and cost involved.
? Accurate and timely flow of information from customer to workshop and vice versa.
? Ensuring promises to customers are met, particularly with respect to timings and costs.
? Explanation of invoices and return of car to customer (after receipt of due payments)
KEY ROLES:as a technican
? All the running repair work & service work.
? Also worked as Major Job team group who handle the Engine, Transmission and major electrical problems.
? Worked on all the latest machines like Wheel alignment, wheel balancing machine, pollution control machine of petrol and diesel .Injector cleaner and spark plug tester.
? Worked on GMI Diagnostic scan tool Tech-2, Candy and Knowledge of M.D.I
? Knowledge of scanner implementation on vehicle and diagnosed the troubleshoot.
? Knowledge of Engine Management System Of petrol and diesel. Sensor and actuator.
? Ability of diagnose a Electrical fault in vehicle.
? Knowledge of How to read a Wiring Diagram and how to use in diagnose a troubleshoot.
FLOOR WARRANTY SUPERVISOR:-
? Knowledge of PCR making of a part failure with a good quality.
WORKED AS A DEALER TRAINING CO-ORDINATOR
? Maintaining All the technician staffs training reports and Helped them to get a good training higher knowledge.
? Handling the service bulletin & campaign and discuss and implement them on daily basis.
PERSONAL DETAILS
Date of Birth: 09 Sep.1986
Father’s Name: Mr. Vishun Dev Sharma
Sex: Male
Nationality: Indian
Languages Known: Hindi & English
Marital Status: Single
Personal Qualities: Focused, Dedicated, Committed and Team Player.
ARVIND SHARMA
May 30th, 2011 at 3:09 pm
CURRICULUM VITAE
Email:arvindsharma40@yahoo.co.in
Address: P-129, Mohan Nagar, Uttam Nagar
New Delhi –110059
ARVIND SHARMA
Contact: 9999505090, 9968407832
CAREER OBJECTIVE
A suitable position in a forward-looking organization to contribute and learn by undertaking interesting and challenging tasks.
EDUCATIONAL CREDENTIALS
10th Passed From CBSE Board in 2002
12th Passed From CBSE Board in 2004
B.Com Passed from Delhi University in 2007.
TECHNICAL EDUCATIONAL CREDENTIALS
? 2 Years Certificate Course ITI PASSED in AUTOMOBILE TRADE from TILAK NAGAR
?
? Diploma in Automobile Engineering from Pusa Polytechnic.( result awaited)
SCHOLERSHIP HOLDER:
? 1st Position in Scholarship Examination in ITI.
COMPUTER SKILL
? Knowledge of Computer Basic, M.S.Office
? Working on Internet, E-mail working, Outlook Express.
WORKING EXPERIENCE
AS A SERVICE ADVIOSR
AUTO VIKAS PVT. LTD.
Organization : GMI PVT. LTD.
Period : 1 JULY 2007 TO TILL DATE
RING ROAD HONDA
Organization : RING ROAD HONDA
Period : 1 YEAR
AS A TECHNICAN
Organization : Nissan moto ltd
Period : one year
KEY ROLES as service advisor
? Providing efficient and helpful assistance to service customers.?
? Securing and developing regular customer relations.
? Creating customer appointments and scheduling according to workshop capacity.
? Receiving customer’s car for Service. Ensuring customer mobility.
? Preparing Job / Repair orders for workshop and follow the working process, including
customer contact for approving additional work and cost involved.
? Accurate and timely flow of information from customer to workshop and vice versa.
? Ensuring promises to customers are met, particularly with respect to timings and costs.
? Explanation of invoices and return of car to customer (after receipt of due payments)
KEY ROLES:as a technican
? All the running repair work & service work.
? Also worked as Major Job team group who handle the Engine, Transmission and major electrical problems.
? Worked on all the latest machines like Wheel alignment, wheel balancing machine, pollution control machine of petrol and diesel .Injector cleaner and spark plug tester.
? Worked on GMI Diagnostic scan tool Tech-2, Candy and Knowledge of M.D.I
? Knowledge of scanner implementation on vehicle and diagnosed the troubleshoot.
? Knowledge of Engine Management System Of petrol and diesel. Sensor and actuator.
? Ability of diagnose a Electrical fault in vehicle.
? Knowledge of How to read a Wiring Diagram and how to use in diagnose a troubleshoot.
FLOOR WARRANTY SUPERVISOR:-
? Knowledge of PCR making of a part failure with a good quality.
WORKED AS A DEALER TRAINING CO-ORDINATOR
? Maintaining All the technician staffs training reports and Helped them to get a good training higher knowledge.
? Handling the service bulletin & campaign and discuss and implement them on daily basis.
PERSONAL DETAILS
Date of Birth: 09 Sep.1986
Father’s Name: Mr. Vishun Dev Sharma
Sex: Male
Nationality: Indian
Languages Known: Hindi & English
Marital Status: Single
Personal Qualities: Focused, Dedicated, Committed and Team Player.
ARVIND SHARMA
June 1st, 2011 at 10:19 am
E-mail: ipsit-sahu@hotmail.com
Mobile no.: +919933355703
IPSIT SAHU
CAREER OBJECTIVE:
Seeking a position to utilize my skills and abilities in a reputed automobile industry that offers professional growth while being innovative and flexible.
ACADEMIC QUALIFICATIONS:
• MBA in Marketing with 63%, from Acharya Institute of Technology, Bangalore, India under Visvesvaraya Technological University (VTU) in the year 2009.
• B.E in Mechanical Engineering with 62% from Synergy Institute of Engineering and Technology, Dhenkanal, Orissa, India in the year 2006.
• Passed 12th (C.B.S.E.) in 2001 with 55% from D.A.V. Public School, Unit-8, Bhubaneswar, Orissa, India.
• Passed 10th (C.B.S.E) in 1999 with 79% from St. Xavier’s High School, Bhubaneswar, Orissa, India.
PROJECTS HANDLED:
• Project on “Manufacturing of Hand Injection Mould” from Central Tool & Training Center, Bhubaneswar, Orissa, India
• Project on “Refrigeration System” during B.E. Mechanical Engineering.
• “In-plant Training” in Karnataka Antibiotics and Pharmaceutical Limited, Bangalore, India, during MBA 2nd semester.
• Project on “The impact of OMFED products on the life of Retailers” from Orissa Milk Federation, Orissa, India, during MBA 3rd semester.
• “6 months” Apprentice Training in Capital Ford Service, Bhubaneswar, Orissa, India.
PAPERS PRESENTED:
• Advertising, Retailing.
• New Product Development and Product Life Cycle.
• Information System in the Enterprise.
• Developing a global vision through marketing research.
WORK EXPERIENCE:
8 months experience (15-Sep-2010 to 15-May-2011) in an Automobile Industry as Dealer Account Manager/Territory Manager/Area Manager in FORCE MOTORS LTD, formerly known as Bajaj Tempo Limited.
INTERESTS:
Psychology, Advertisements, Automobile Customization, Surfing Internet, Table Tennis, Music, Movies, Drawing, Sketching, Reading.
SKILLS:
MS-Office, C++, AutoCAD, Internet Surfing Skills, Good Communication, Fast Learner, Optimistic, Persuasive, Team Player, Computer Savvy, Creative, Marketing Communication, Technical Writing.
PERSONAL DETAILS:
D.O.B 25-06-83 Religion Hindu
Sex Male Marital Status Single
Nationality Indian Languages English, Hindi, Oriya
ACHIEVEMENTS:
• Contributed as a “CHILD SCIENTIST” in the 7th National Children’s Science Congress (State Level) under the focal theme “Let us Conserve Share Care” in 1999, Bhubaneswar.
• Participated in the course entitled “SWIFT INDIA” in 1999 at NIIT, Bhubaneswar.
• “Second Prize Winner” of All India Camel Color Contest ’96, Bhubaneswar.
• Participated in “National Conference on Managing SMEs in a Globalized Environment”, dated 5th Nov 2008 at New Horizon College of Engineering, Bangalore.
REFERENCES:
Dr. Mohan N.J. Montiero, Director, MBA Department, Acharya Institute of Technology, Soldevenahalli, Hesarghatta Road, Bangalore, India.
Contact No. +919739765802
June 17th, 2011 at 4:22 pm
I would like to express my interest in a position as a GET-01 for your company.
As a recent graduate with experience in Automobile Industry, I believe I am a strong candidate ..
You specify that you are looking for B.E./B.TECH Fresher with <1 year Experience. Sir I have variety of experience.
My maturity, practical experience, and eagerness to enter the industrial sector will make me excellent. I would love to begin my career with your company, and am confident that I would be a beneficial addition Your Company
Sincerely,
Mohak Chaturvedi
____________ Mohak Chaturvedi
Email: mcmohak@gmail.com
Cell: 9039246296
LinkedIn: linkedin.com/in/mcmohakchaturvedi
June 17th, 2011 at 4:24 pm
MOHAK CHATURVEDI Contact Add.:
Email-id:-mohak_23@rediffmail.com 3 Floor , Undre Hospital ,Wagholi
mcmohak@gmail .com Pune(Maharashtra)
Mob.no.- 9039246296 , 7507092056
Career Objective:
To work in a professional managed organization enabling my professional and personal growth and offering a significant learning and performance based career in the latest and fast growing techno commercial domain. I wish to involve as an effective personality through progressive, sincere and sustained efforts.
Experience Summary:
Current Employee : ZF Steering (India) Pvt. Ltd.
Designation : Trainee Engineer
Working Period : Since 02 Nov. 2010. to till date.
Previous Employer : Fiat India Automobiles Pvt. Ltd.
Working Period : 06 Aug. 2010 to 06 Oct. 2010
Software Proficiency:
• Competency in MS Office, Open Office Packages (i.e. Word, Excel, PowerPoint)
Educational Qualification:
Examination Discipline/
Specialization School/College Board/
University Year of passing Percentage (%)
B.E. Mechanical Engineering Ujjain Engineering College(MP) R.G.P.V. Bhopal 2010 69%
Intermediate Science+math stream Saraswati Higher Sec.School Jabalpur(MP) M.P. Board Bhopal 2005 70.20%
S.S.C S.S.C S.C.A. Higher Sec.School Jabalpur(MP) M.P. Board Bhopal 2003 63.4%
Project Summary:
• Major Project –Power Production by Air Ventilator.
Detail:
Generally Power is Produced By Some Source , just Like Water is the Source In Hydro Power plant ,Similarly Coal used in Themal Power Plant to Produce Power,But my Approach Is to produce Power without using any Source.In my Project I Produce little amount of Power By Natural air Without Using Any Consumable Source.
• Minor Project- Power Production by Air ventilator
Industrial Training:
• Minor Training From TaTa Autocomp Systems Pvt. Ltd. (Car Interior & Plastic Division) PUNE
• Major Training From Fiat India Automobiles Pvt. Ltd. (Production Plant) PUNE
Extra Curricular:
• Entrepreneurs & Carrier Planning.
• Went Upto 2 Level in National Science Olympiad Jabalpur (MP.).
Personal Details:
Name : Mohak Chaturvedi
Fathers Name : Shri A.D. Chaturvedi
Nationality : Indian
DOB : 23/07/1987
Gender : Male
Marital Status : Single
Languages Known : English, Hindi.
Declaration:
I hereby declare that the above written particulars are true to the best of my knowledge and belief.
Date : MOHAK CHATURVEDI
Place :
July 18th, 2011 at 10:00 pm
CV of Mechanical engineer(2 Years experience)
Dambarudhar Sahoo
B.Tech (Mechanical Engg.)
Assistant Manager
Mobile – +91-9039279228
+91-9338582150
Email – tapana06@yahoo.co.in
Objective:
To achieve a position in a rapid growing Company to utilize my Technical knowledge to achieve the target in terms of Quality, Production and Economy with excellent result.
Professional Summary:
Total 2 Years of experience in Maintenance & Project.
At BALCO, 1 year & 7 months on Aluminium Smelter Plant, using GAMI Technology, 330 KA current,3.5 MT capacity in Maintenance of Pot room & 5 months at engineering college as guest lecturer.
LAST EMPLOYER :
Affiliation and Last Job Responsibilities:
Organization: Bharat Aluminium Company, Korba (Vedanta Group)
Designation: ASSISTANT MANAGER (E-1 Grade)
Department: Utility Department
Duration: 13TH JANUARY -2010 to 03RD-JULY-2011
Experience: 1 Year 5 Months
Current salary: INR. 400000.00 Per Annum.
PROJECTS:
? Cooling Tower FRP blade project;
FRP blade replacement in each cooling Tower.
? Inter-Connection Of All equipments of Utility
Interconnection of Diesel Compressor, Secondary Dryer, Motor driven Compressor
receiver tank with main Air Dryer & its Discharge line to avoid any abnormalities.
ACHIEVEMENTS:
? Internal Maintenance of Air Dryer avoiding service engineer from outside.
? In-house preparation of cooling tower propeller-shaft.
NATURE OF JOB & RESPONSIBILITY:
JOB TITLE: Shift In-charge at Utility Department (Operation & Maintenance).
• Maintenance of all Equipments of Utility (Centrifugal Compressors of IR, Centrifugal Pumps, Air Dryer, Cooling Tower,Diesel engine,Motor,Blower & Fan, Pneumatic devices , reciprocating compresor,Crane & Intercoolers)
• Water filtration plant & fire fighting pump house.
• Maintenance of Water, HFO, Steam & Compressed air pipe line maintenance (preventive & breakdown).
• Rectification of Breakers , feeders & all pneumatics online.
• Collector bar disconnection & connection.
• Online Pot Cutout while current is 330 KA.
• Preparation of Asset Score card, availability report & water consumption report.
• Preparation of Sop, SMP, Checklist & FMEA of equipments etc.
• Compressed air, Steam, HFO & Water supply (Process & drinking & Fire) in plant with 100% availability.
• CBM of Equipments.
PREVIOUS EMPLOYER (2):
Organisation : Indira Gandhi Institute of Technology,Sarang
Designation : Guest Lecturer
Duration : 01-August-2009 to 10-January-2010
Responsibility : Mechanical subject teaching to engineering students,
Computer skills:
• Auto-CAD
• Microsoft Applications(MS-word, MS-excel, Power point, Access)
• SAP-pm module.
• Lotus Notes, Internet use
• Operating System(Window XP,Vista,2007)
• Engineering Drawing Reading.
PROJECT (ACADEMIC):
Academic : CVD Diamond Coating Cutting Tool.
Description: Putting a diamond layer of 10 micron on a tungsten tool surface by chemical synthesis of
Methane & Hydrogen in the ratio of 1:99 at high pressure of 10 bar above 750 degree
celsius in inert atmosphere.
.
Academic Details:
2009 B.Tech. (Mechanical Engg.) Indira Gandhi Institute of Technology, Sarang
(Affiliated to Biju Pattnayak University of Technology, Rourkela)
CGPA: 8.52 (Equivalent to 85.2%)
Duration- 2005 -2009
2004 12th (Science) Kendrapara College, Kendrapara
Aggregate: 83.3%
2002 10th Matriculation from B.B.B.High School, Kapaleswar
Aggregate: 82.2%
Academic Achievement:
1. Free Studentship during my B.Tech Mechanical engineering from My College.
2. Scholarship from FOUNDATION FOR EXCELLENCE, for higher study during B.Tech (Mechanical Engineering) for four years.
TRAINING:
1. Summer Vacation Training at “Hindustan Aeronautics Limited, Sunabeda for One month
Project: “Study of manufacture & assembly of HPTR of Aero Engine”.
2. Training on Operation & maintenance of Air Compressor, Dryer & Pneumatics for 3 days by M/s Ingersoll Rand during job at BALCO.
STRENGTH:
• Leadership, Manpower management, Time Management, Encouraging Team Players.
• Student Secretary during Engineering career & +2 science career.
• Negotiation Skill, Cost saving ideas.
Personal Details:
Name: Mr. Dambarudhar Sahoo
Father: Mr.Trilochan Sahoo
Gender: Male
Date of Birth: 10 September 1985
Languages Known: English, Hindi & Oriya
Permanent Address: At-Garapur, Post-Kapaleswar, Dist Kendrapara, State-Orissa
Pin-754211, India
Passport Details: Passport No : H4543776 (INDIA)
Place of Issue : Bhubaneswar, India Date of Issue : 30/11/2009
Date of Expiry : 29/11/2019
References:
Mr. Prashant Kumar Singh, Manager, HINDALCO, Mobile-09669200671
Mr. Bidyadhar Sahoo, Professor, Mechanical Engineering, IGIT, Sarang, 09861190444
Declaration:
I hereby declare that above mentioned details are true to best of my knowledge and belief.
Place: Kendrapara Dambarudhar Sahoo
July 25th, 2011 at 12:11 pm
Covering Letter:
Sir/Madam
I am Kasiviswanth. Bandhika from India. I did Diploma in Automotive
Technology (DMAT 0711-A) in THE OTOMOTIF COLLEGE, MALAYSIA. I am looking for
Job in Automotive Industry (Car Mechanic).
I did internship in BERMAZ (MAZDA) MOTORS, MALAYSIA. For more Details please
find the attachment.
Thanking you Sir/Madam,
Regards
B.KasiViswanth
0091-9890507887
CURRICULUM VITAE
1.0 Personal Data :
Name : KASIVISWANTH.BANDHIKA
Address : S/o B.RANGANNA, POLICE QUARTERS NO:-10, 2nd FLOOR, YEMMIGANUR, KURNOOL (DT), ANDHRAPRADESH (ST).
Current Address : C/o Nagesh.Mitti, Manik chouk, Chakan, Pune.
Contact Number : H/P :00919890507887 & 00918792761301
Email : bkviswanth@gmail.com or bkvisw04@yahoo.co.in
Passport No : G 4677003
Marital Status : Single
Gender : Male
Nationality : INDIAN
Willing to Relocate : yes
Possess own transportation : No
Expected Salary : Rs 20000 to Rs 25000 (Rupees)
2.0 Career Goal:
Achieve greater heights, love, live and enjoy my job, improve my knowledge across borders and create new breakthroughs in the industry. To enhance my knowledge in automotive and able to participate myself in every department of the workshop as well.
3.0 EDUCATIONAL QUALIFICATION:
Name Of college /Address : The Otomotif College
No. 10, Jalan 19/1, Section 19, 46300 Petaling Jaya, Selangor, Malaysia.
Qualification : Diploma in Automotive Technology (DMAT 0711-A)
Area of Specialization : Car Mechanic (Automotives), Vehicle Maintenance, Servicing , Engine and Transmission Overhauling And All Diagnosis tools using.
Year Of Completion : November 2007 to June 2010
4.0 EMPLOYMENT HISTORY:
4.1
Company PRIMA MERDU (BERMAZ) Sdn Bhd
Address Jalan 219 ,Federal Highway,46100 Petaling Jaya, Selangor Darul Ehsan.
Position Title : Trainee.
Period : 15 December 2009 – 15 may 2010 (6 months)
Type of Car : MAZDA (All Models)
Job Scope:
1. Engine Tuning Performance 4.PDI
2. Servicing 5. Diagnostic scan tools
3. Overhauling
4.2
Company MOTOR CONFIDENCE Sdn Bhd
Address No 11 .SS2/2, 47300 Petaling Jaya, Selangor Darul Ehsan.
Position Title : Trainee.
Period : 15 June 2009 – 30 August 2009 (2 months)
Type of Car : PERODUA (All Models)
Job Scope:
1. Engine Tuning Performance
2. Servicing
3. Overhauling
4.3
Company M-Power Auto Care Center Sdn Bhd
Address : Near Taman Mayang, Petaling Jaya, Selangor.
Position Title : Trainee.
Period : 16 February 2009 – 18 April 2009 (2 months)
Type of Car : BMW, Mercedes Benz (Specialist)
Job Scope:
1. Periodic Servicing
2. PDI.
3. Engine Overhaul and Tuning
4. Change Transmission.
4.4
Company KIM LEE YANU
Address : Shell motors, 46100 Petaling Jaya, Selangor.
Position Title : Trainee
Period : 1 September 2008 – 15 November 2008 (2 months)
Type of Car : Mercedes Benz, Honda, Kia, Naza.
Job Scope:
1. Handle with electronic gadgets.
2. Troubleshooting.
3. PDI.
4.NGV System
4.5
Company MOTOR CONFIDENCE (M) SDN BHD
Address : No. 11, Jalan SS2/1, 47300 Petaling jaya, Selangor.
Position Title : Trainee
Period : 21 May 2008 – 28 July 2008 (2 months)
Type of Car : PERODUA (All Models)
Job Scope:
1. Periodic Servicing
2. Diagnostic
3. Overhauling
5.0 ADDITIONAL SKILLS:
5.1
No Skills Proficiency
1. Basic IT Intermediate
2. Ms Office Intermediate
3. Able to troubleshoot the vehicle’s problems by using Diagnostic scan tools Intermediate
5.2
LANGUAGE PROFICIENCY Written Spoken
(Proficiency: Best=10 – Worst=1)
1. English 10 10
2. Telugu 10 10
3. Hindi 2 8
4. Tamil 1 6
5. Kannada 4 8
5.3
STRENGTHS
Team work ? Able to work in team.
Hardworking ? Willing to learn more and enjoy working.
5’S ? Work in order and always keep the work place clean and tidy.
Working ? Can work under pressure.
Sociable ? Very Good
6.0 LOCAL REFERENCE:
6.1
Ms Kavitha.
Company Name : The Otomotif College
Designation : Head Of Student Affairs
Contact Number : 00603-7955 2811
6.2
Mr. Kriss.
Company Name : The Otomotif College
Designation : Career Development Centre Executive
Contact Number : 006016-2002584
——————————————
(Kasiviswanth. Bandhika)
July 26th, 2011 at 11:48 pm
CURICULUM VITAE
Siddesh Naidu
Email:- naidu.siddesh@gmail.com Mobile :- 0-8793456635, 9689570422.
______________________________________________________________________________
ABOUT ME:
I am confident about my work and knowledge. I always like to think in positive manner. I can work in teams and also lead the team in positive direction. I can learn new things and Also make new friends. I work with full enthusiasm when provided with conductive environment. I don’t like the people who try to avoid the work assigned to them , but I can tolerate this to some extent. I like to be disciplined and expect the same from my team mates.
FUTURE CAREER:
I would always like to be part of reputed organization where my knowledge and skill would be an asset. I would like to create new things which are not only beneficial to my organization but also to the society. I would like to be strong asset to your esteemed organization.
STRENGTHS:
Quick learner, Positive thinking, leadership, self confidence, punctuality, neatness, self study etc..
WEAKNESS:
Accepting only calculated risk .
EDUCATION BACKGROUND:-
EXAMINATION YEAR INSTITUTE UNIVERSITY %MARKS CLASS
B.E
(mechanical) 2011 D.Y.Patil college of engg & tech Shivaji university kolhapur 68.10 DISTINCTION
DIPLOMA
(automobile) 2008 New polytechnic Kolhapur. M.S.B.T.E 75.12 DISTINCTION
H.S.C 2005 G.K.G college kolhapur H.S.C Board kolhapur 52.67 2nd
S.S.C 2003 St. xaviers high school
kolhapur S.S.C Board kolhapur 56.26 2nd
SOFTWARE ORIENTATION:
Operating system used Windows 98-2009,NT,XP.
Software used Auto CAD 2000-2009,NX3
Programming language known C,C++.
TRAINING:
Sr.no Company Address Duration
1. Unique automobile Railway phatak, Kolhapur. 20days
2. Sun mill industries M.I.D.C Kolhapur. 15days
EXTRA CURRICULAR ACTIVITIES:
TOPIC EVENT VENUE
Hungry India Paper presentation D.Y.PATIL Kolhapur
Poster presentation Paper presentation D.Y.PATIL Kolhapur
Robo tech. Robo Race Bharti vidhyapeth Kolhapur.
LOCATION PREFERENCES:
Bangalore , pune , hydrabad , Mumbai- Abroad
July 28th, 2011 at 6:34 pm
MILAN PRADEEP RANA
Central railway colony E-mail: Milan_rana4@yahoo.com
Qtr no. RB-2nd 274 ‘D’, Mobile: +91-7698851199.
Nagpur-440003 (Maharashtra)
CAREER OBJECTIVE
? To secure a challenging position where I can contribute my skills and can enhance my knowledge.
ACADEMICS
B.E. in Mechanical Engineering from
Sr. No Year Name of exam University/Board
Percentage %
1. 2010 B.E. MECHANICAL RTM Nagpur Univ. 61.9%
2. 2006 HSSC Maharashtra board 73.67%
3. 2004 SSC Maharashtra board 72.66%
St.vincent pallotti College of Engineering and technology, Nagpur.
TECHNICAL SKILLS
? Design software: Autodesk inventor, PRO-E.
? Operating System: Windows,
? Programming Language: C , HTML .
? MINI PROJECT
I made prototype of inlet outlet value mechanism in IC.
? SEMINAR
I had given seminar on PLUG-IN-HYBRID CAR.
PROJECT DETAILS
Eliminate the problem of Under heating of the catalytic converter.
i tried to sort out the problem of overheating of the catalytic converter. In the project i segregated the various causes of the overheating and it effect on the performance of the catalytic converter. My project suggest the passing of the exhaust gases through a pipe having fins before making it pass through the catalytic converter. i worked out the CFD(CFX-10) analysis of the conventional and its modified design. the result yielded the desired results and the performance of the cat con also improved.
TRAININGS
? I have done industrial training at BHILAI STEEL PLANT.
PROFESSIONAL EXPERIENCE
june 2010 Onwards:
As a Engineering Manager, working with The Arvind Mills Limited, Ahmedabad reporting to HOD-Engineering.
Job Profile:
• Exposure for maintenance, troubleshooting, rectification, repair & diagnosis of PLC & microprocessor controlled machinery in the whole plant.
EXTRA CURRICULLAR ACTIVITIES
? Active member of Road Safety Patrol during ssc.
? Participation in Nagpur International Marathon.
? Active member in inter branch cricket team.
? Participation in Science Exhibitions.
? Participation in various sports during annual sports.
KEY STRENGTHS
? Good listener and learner.
? Adjusting nature.
PERSONAL DETAILS
Date of birth: 12th December 1987.
Age: 24 yrs.
Sex: Male
Hobbies: travelling, Painting, interacting with people, Listening Music
Strength: Time Management, Patience, Adaptive, Work with team.
Languages Known: English, Hindi, and Marathi.
Nationality: Indian.
DECLARATION
I here by declare that the above information is true to the best of my knowledge.
Place:ahmedabad
Date: 15 may 2011 (MILAN.RANA)
July 29th, 2011 at 3:13 pm
Respected sir/madam,
With reference to your address in with pleasure, I would like to send my resume in the attachment with e-mail. If your organization arrange personal interview. I am ready to attend at anytime as per your convenience.
I will prove myself as a valuable asset for your company.
Thanking you,
With regard,
Rajesh Wagh
(B.E in Mechanical Engg.)
July 29th, 2011 at 3:16 pm
Respected sir/madam,
With reference to your address in with pleasure, I would like to send my resume in the attachment with e-mail. If your organization arrange personal interview. I am ready to attend at anytime as per your convenience.
I will prove myself as a valuable asset for your company.
Thanking you,
With regard,
Rajesh Wagh
(B.E in Mechanical Engg.)
(rajesh.mech22@gmail.com)
(9960090100)
July 29th, 2011 at 11:26 pm
RESUME
Prasanna S Bilur
Address: Prasanna S Bilur
S/o S I Bilur
#3 Basava apartment,
Banker’s colony,
Gadag-582103
Contact no: +919538357413, 9481552511
E-mail address: prasannasb2@gmail.com
Objective: To seek a suitable position where my knowledge can be utilized to the maximum extent & to work in your organization with enthusiasm, dedication, responsibility and good work ethic, combined with a desire to utilize my skills obtained through experience.
Personal Details:
Father’s name: S I Bilur.
Date of Birth: 02-10-1989
Gender : Male.
Marital status: Single.
Languages Known: English, Hindi, Kannada.
Academic Credentials:
Degree University Name of the institution Semester Year of passing Percentage
I 2008 67.87%
BE
Mechanical
Visvesvaraya Technological University
Tontadarya College of Engineering
Gadag II 2008 63.74%
III 2009 65.78%
IV 2009 70.12%
V 2010 59.5%
VI 2010 55.78%
VII 2011 69.23%
VIII 2011 81.90%
aggregate 66.75%
Examination Board Name of institution Year of passing Percentage
Intermediate
Pre University board
S S P U College Tumkur
2007
55%
Matriculation Karnataka secondary education board. Bharath matha English medium school
Tumkur
2005
74%
Skill set/ Software’s known:
• Solid Edge V19, ANSYS, CNC CADEM, AUTO CADD 2010.
Training Undertaken: One month training was undergone in an industry in Belgaum and trained as a “MACHINE OPERATOR”.
Projects Undertaken:
• Social project like creating a PARKING LOT in our college.
• Final year project.
Title: Distillation of Water through Solar distillation
Accomplishments:
• Leading our “Association of Royal Mechanical Students” as a GENERAL SECRETARY.
Other activities :
• Completed NCC with “B” certificate.
• Participated in BHARAT SCOUTS activities.
• Completed JUNIOR and SENIOUR grades in Distinction in playing instrument TABALA.
Hobbies and Interests: Playing Music, Playing Cricket, Volley ball, Making Stunts in Bikes and Cars, Computer games, Listening Music.
Declaration:
I hereby declare that the above mentioned is true as per my belief and knowledge.
Date: Signature of the candidate
August 1st, 2011 at 5:41 pm
SUMMARY OF QUALIFICATIONS
• Graduate in Industrial Engineering with internship experience.
• Technical knowledge and experience in implementing Lean Manufacturing.
• Excellent analytical, problem-solving and interpersonal skills.
• Track record of superior performance by exceeding expectations.
EDUCATION
Master of Science in Industrial & Systems Engineering Dec 2010
University of Florida, Gainesville, USA GPA: 3.97/4.00
Bachelor of Engineering in Instrumentation & Control May 2009
St.Joseph’s College of Engineering, Chennai, India 78.46%
Higher Secondary Course April 2005
Union Christian Matriculation Higher Secondary School, Chennai, India 90.67%
Matriculation Examination April 2003
Union Christian Matriculation Higher Secondary School, Chennai, India 87.45%
RELATED COURSEWORK
• Manufacturing Management
• Systems Design
• Deterministic Methods in O.R.
• Production Management Problems
• Systems Management
• Advanced Production & Inventory Control
• Applied Probability Methods in Engg.
• Principles of Logistics & Transportation
WORK EXPERIENCE
Industrial Engineering Intern May 2010 – July 2010
Simpsons & Company Ltd., Chennai, India
• Performed time-motion studies and developed revised work schedules to achieve goals and targets for improvement in productivity which could result in a 12.8% increase in output.
• Performed FMEA on an oil ways and waterways leak testing machine and proposed solutions.
• Analyzed causes for irregularities in a keyway milling machine and solved the problem.
• Studied customer complaints and gave recommendations to ensure quality from our end.
• Proposed a replenishment schedule for the engine timing case, which could result in savings of around Rs. 95,000/- every quarter, compared to the schedule that was being implemented.
PROJECTS
Taxi Service Optimization March 2011 – June 2011
• Worked on developing a simulation model to simulate customer demand and taxi service in the Manhattan region of New York City.
• Involves determining the optimal number of taxi stands and taxis required to meet customer demand, while fulfilling customer satisfaction regarding their waiting time.
Simulation of Chick-fil-A Sep 2010 – Dec 2010
• Developed a VB application to improve accuracy and ease the collection of data.
• Formulated and solved a linear program using Excel Solver to generate a basic worker schedule, which was further modified using simulation output results, to arrive at the optimal schedule.
• Introduced an express counter to service quick orders, which helped to bring down the average waiting time of the customers, thereby bringing down balking and reneging.
Ranking of Apartments Jan 2010 – Apr 2010
• Gathered data from around two hundred residents in twelve apartments across Gainesville.
• Analytic Hierarchy Process and other Multi-Criteria Decision Analysis techniques such as Laplace Criterion, Hurwicz Criterion and Lexicographic Analysis were used for ranking.
• Helps future students to decide on their apartment, based on their selection criteria.
Fuzzy Based Automated Vehicle Jan 2009 – Mar 2009
• Designed and developed a small vehicle which makes use of sensors to detect and steer away from obstacles automatically.
• Fuzzy logic was used to aid in the decision making process for which, the current vehicular speed and the distance between the vehicle and the obstacle were given as inputs.
• Execution of decisions was carried out by controlling the steering and braking mechanisms.
AWARDS & ACTIVITIES
Achievement Award
• Received from University of Florida, Gainesville, due to academic record of achievement.
Merit Scholarship Recipient
• Received from St.Joseph’s College of Engineering, Chennai, due to outstanding academic performance.
Paper Presented
• Presented a paper entitled ‘Wireless Optical Communication’ at Milina ’08, a technical symposium conducted by Shri Angalamman College of Engineering & Technology, Trichy.
• Based on a study regarding implementation of optical communication and its advantages over the conventional wireless system.
Symposium Participant
• Participated in ‘Mechanica’, a technical symposium conducted by IIT Madras.
• Contributed to a five member team which designed a Rube Goldberg contraption that successfully executed a simple process with more than seventy different energy conversions.
SKILL SETS
Programming Language :
C, C++, VB.NET
Simulation Tools : MATLAB, Simulink, ARENA
Optimization Tools : LINDO, LINGO
Application Software :
MS Office (Excel, Word, PowerPoint, Project)
Operating Software : Windows, Mac OS
FUNCTIONAL EXPERTISE
Supply Chain : Production and Inventory Control, Forecasting, Logistics, Push and Pull strategy, Theory of Constraints
Manufacturing : 5S, KAIZEN, Material Requirement Planning, Six Sigma,Just In Time, TPM, TQM, Agile, Lean Manufacturing
Project Management : CPM, PERT, Decision Trees, Critical Chain
Operations Research :
Linear and Nonlinear programming, Integer Programming,
Queuing Theory
August 3rd, 2011 at 10:23 pm
CURRICULUM VITAE
Narayan Ashok Itakale Address :
Email :- narayanitkale@gmail.com At/Post Kerur
Contact No. 7588119882 Tal. Tulajapur
Dist. Osmanabad
Pine Code 413 501.
OBJECTIVE
To bean asset of organization which allows me to utilize my functional and technical skills and helps me to learn. Contribute and grow where creativity, hard work and sincertity are recognized and well rewarded.
EDUCATIONAL PROFILE
H.S.C. Art’s, Science & Commerce College Naldurg, Osmanabad 45 % in year Feb. 2009-10. Subject for – Auto Engineering Techniciation.
S. S. C. Jawahar Vidhyalay, Andur under Pune Board with 55%.
SKILLS
Auto Engineering Techniciation.
PERSONAL SKILLS
Self-Motivated and Committed.Flexibility and Adaptability.
Willingness to learn more.Honesty and Patience.
EXPERIENCE DETAILS – 6
PERSONAL DETAILS :
Name :- Narayan Ashok Itakale
Father’s Name :- Ashok
Date of Birth :- 13/03/1993
Nationality :- Indian
Marital Status :- Single
Known Languages :- Marathi, Hindi.
Hobbies :- Cricket
Permanent Address :- At/Post Kerur Tal. Tulajapur, Dist. Osmanabad
Contact No. :- 7588119882
Declaration
I here declare that above written particulars are true to the best of my knowledge and belief.
Date : / / 2011
Place : Osmanabad. (Narayan)
August 5th, 2011 at 10:29 am
CURRICULUM VIATE
ARMAN SHARMA (page 1)
S/O Sh. RAVINANDAN SHARMA
H. NO.118, SECTOR-17
OPP. HUDA MARKET,
GURGAON–121008
EMAIL ID: – armansharma.er@gmail.com
CELL NO– +91-9711160144
APPLICATION FOR THE POST OF: -__________________________
CARRER OBJECTIVE
? In due course of time you will find & realize that my selection is your right choice. By the dint of hard work Labour, honesty and integrity I will prove myself as an asset in the organization.
PROFESSIONAL QUALIFICATION
? B.Tech in Mechanical Engg. From N.C. College of Engg. Panipat under Kurukshetra University, Kurukshetra with 64.2% in 2005.
WORK EXPERINCE
? Presently working in MINDARIKA PVT. LTD, Manesar (guragon) as asstt Manager in Production & Process Engineering (PE) deptt. since March’10.
? Job profile;
1. Fixture design and development.
2. Standard work documents such as STD work combination table, Yamazumi, STD work sequence etc.
3. Improvement in production capacity through time and motion study.
4. Implementation of TPS (Toyota Production System i.e. lean manufacturing)
5. FMDS (Floor managment development sheet) work.
6. Horizontal deployment of poke-yoke for line facility and capacity enhancement.
7. Established the Assembly line of WHEEL COVER PROJECT.
8. Doing Process audit by Mizen boshi activity (proactive prevention) regarding to the four major concerns like missing part ,wrong part, process skip & extra parts by taking two assembly line every month.
? Served in EMSON GEARS. LTD, ludhiana as a gear design & process engineer in design and development deptt. from March’08 to March’10. It has a remarkable turnover of 120 crores in autopart manufacturing and has an excellent platform in gear manufacturing field.
? Job profile;
1. Development of gear, shaft and cams.
2. Process operations of gears and axles. Designing & calculation related to gear manufacturing and weight calculation.
3. Layout of final developed part such as hydraulic shafts, cam, oil pump gears etc
4. CAPA, PDIR and layout inspection reports.
5. PPAP, APQP and FMEA documentation.
6. Design and analysis of gauges (Receiving & DOP).
? Served in TECH AUTO (Pvt) Ltd, Ludhiana as a design engineer in design and Engg. deptt. from July, 05 to Feb’08. One of the leading exporters and manufacturer of auto part with TVS, ITL as domestic customers and Jay industries, Kraft tube, Ford, Chrysler motor ltd as US customers, having turnover of about 75 crores.
? Job profile;
1. Inspection of press tools for the production.
2. Designing of press tool, receiving gauges and fixture
3. Reverse Engineering of exiting tools.
4. Costing & estimation material used in processes.
TECHNICAL TRAINING
1. Two months AUTO CAD course training from IMTT, Batala.
2. PRO- E from C.T.R, Ludhiana.
PERSONAL DETAILS
Father’s Name : Sh Ravi Nandan Sharma
Mother’s Name : Smt. Pariksha Sharma
Date of Birth : 4th March 1984
Marital Status : Unmarried
Salary drawn : Rs 4.2 lac p.a. (CTC)
Expected salary : Negotiable
Place _________
Date __________ (ARMAN SHARMA)
August 20th, 2011 at 11:04 pm
acquisitions…
Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India…
September 2nd, 2011 at 2:40 pm
MANISH MADANRAO ANPAT (B.E. MECHANICAL)
B/90, DADAR RAILWAY POLICE QUARTERS,
SIR BHALCHANDRA ROAD,
DADAR(E),MUMBAI-400014.
Email Id: manish_5454@yahoo.co.in
: amanish5454@gmail.com
Phone: 9870394368
CAREER OBJECTIVE:
Looking for a promising & challenging career which will enable me to provide best of my Technical, Analytical & Professional skills. A career which can sharpen my current skills and knowledge and where I can have a good scope for learning and implementing new technologies.
EDUCATIONAL QUALIFICATIONS:
B.E. (MECHANICAL)
COLLEGE NAME: M.H. SABOO SIDDIK COLLEGE OF ENGINEERING
8,Saboo Siddik polytechnic road.
Byculla,Mumbai-400008
EXAMINATION BOARD/UNIVERSITY YEAR PERCENTAGE OF MARKS CLASS
SSC Maharashtra State Education Board 2005 86.13% DISTINCTION
HSC Maharashtra State Education Board 2007 84.83% DISTINCTION
F.E. Mumbai university 2008 65.13% FIRST CLASS
S.E Mumbai university 2009 65.94% FIRST CLASS
T.E. Mumbai university 2010 65.29% FIRST CLASS
B.E. Mumbai University 2011 71.73% DISTINCTION
AGGREGATE % OF ALL COMPLETED SEMESTERS: 66.90%
SOFTWARE EXPOSURE:
• Basic knowledge of Microsoft office (Word ,Excel ,PowerPoint).
• MS-CIT.
• Basic knowledge of AUTOCAD,PRO-ENG.,VISUAL BASICS.,ANSYS.
• Basic knowledge of Language like JAVA,C, C++ .
FINAL YEAR PROJECT: KINETIC ENERGY RECOVERY THROUGH REGENERATIVE BRAKING.
PERSONAL PROFILE:
Name : Manish M. Anpat
Date of Birth : 23-05-1990
Father’s name : Mr. Madanrao G. Anpat
Gender : Male
Marital Status : Single
Interests and Activities : Sports, Listening to Music
Languages Known : English, Hindi, Marathi
Nationality : Indian
Declaration:
I undersigned hereby declare that the given information in this resume is true to the best of my knowledge.
Date:
Place:
_____________________________
MANISH M. ANPAT
September 5th, 2011 at 12:58 pm
NitinChhabra
114,SnehSadan,
Near pandukshilla’
Adarshnagar,
Malpura (Tonk)
Rajasthan -304502
Ph. +91 9252812133.
E mail:nitinchhabra38@ymail.com
nitinchhabra.09@gmail.com
Objective
To obtain a challenging & rewarding position in a growth oriented organization which will allow me to utilize my knowledge with diverse job responsibility and that involves problem solving skills & system analyzing skills with creativity and innovation.
Area of Interest
? Part Designing
? Automobile
? Production
Experience
Experience in Design
Company Name: Classic signage pvt.ltd.. .
Designation: Design Engineer.
Duration:1 AUg’10 to till now.
Responsibility: I am working as Design Engineer.
Experience in Design
Company Name: Genus Power Infrastructures Ltd. Jaipur.
Designation: Design Engineer.
Duration: June’1 to 30 july.
Responsibility: I was working on a project namely as RAJEEV GHANDHI GRAMIN VIDHYUTDAYAN YOJANA(RGGVY, A Govt. of India Project)of West Bengal of proposal of the path of Electrical lines and Roads according to them.
Experience in Service & Installation
Company Name: Comfort Air Engg.
Designation: Service &Installation Engineer.
Duration: AUG’09 to MAY’10
Responsibility:To provide Service at sharp time.
Education
Bachelor of Engineering, Mechanical Engineering– 2005 – 2009
(Jaipur Engg. College & Research Centre, Jaipur Rajasthan University) Aggregate:61.2%
Senior Secondary School Examination (Rajasthan Board) – 2005
Govt. Sr. Sec. School, Malpura(tonk).Percentage: 62.00%
Secondary School Examination (Rajasthan Board) – 2003
Govt. Sec. SchoolAvikanagar(tonk) Percentage: 82.83%
A Academic Project
Title: Regerative Brake Role: Team Leader Duration:Jan’09- April’09
Nature of project:Braking and Transmission system of Hybrid and Electrical system(Major Project)
Description: A Regenarative brake is a mechanism that reduces vehicle speed by converting some of its kinetic energy into another useful form of energy.This captured energy is then stored for future use or fed back into a power system for use by other vehicle.
For example, ElectricalRegenarative brake in electrical railway vehicles feed the generated electricity back into the supply system.In battery electric and Hybrid electric vehicle, the energy is stored in a battery or bank of capacitor for later use.other forms of energy storage which may be used include compressed air and flywheel.Regenarative brake is used on hybrid gas/electric automobiles to recoup some of the energy lost during stopping.This energy is saved in a storage battery and used later to power the motor whenever the car is in electric mode.
Team Size:4
Seminar
Hybrid Solar Cell
Team Size:1
Description:Solar cells are devices that convert sunlight directly into electricity by the
photovoltaic effect. Electrons in a solar cell absorb photon energy in sunlight, resulting in jumping to a conduction band from a valence band. This process generates a hole-electron pair, which is separated by a potential barrier (such as p-n junction), and induces a current flowIn hybrid solar cells, an organic material is mixed with a high electron transport material to form the photoactive layer. The two materials are assembled together in a heterojunction type photoactive layer. By placing one material into contact with each other, the power conversion efficiency can be greater than a single material.
Certifications
? AutoCAD-2005-09.
? Training in HINDUSTAN MACHINE TOOLS PVT. LTD.,Ajmer (duration 1 month).
? Training in HINDUSTAN ZINC LTD.,Dariba (duration 45 days).
Skill Set
? Technical Softwares -Auto CAD, Map Info,
Map Source
? Platforms -Windows (2000, XP, vista, Seven)
? Applications -MS office.
? Extensive problem solving and time management skills.
? Ability to work with confidence, initiative and dedication both independently and in a
Team.
Extra –Curricular Activities
? Volunteer in Blood Donation Camp.
? Volunteer in various cultural and events at college level.
? Active member of Student Drive of Alumni Association.
Personal Information
? Date of Birth Nov.07, 1987
? Father’s Name Mr. RajendrakumarChhabra
? Mother’s Name Mrs. Snehlata Jain
? Permanent Address 114,SnehSadan,
Near pandukshilla,
AdarshNagar,Malpura (Tonk)
Rajasthan -304502
? Languages Fluent – English, Hindi and Rajasthani
? Hobbies Playing Cricket,Listening songs
Declaration
I hereby declare that the above information provided by me is true to the best of my knowledge. If given a chance, I will show full devotion & dedication towards the allocated job.
Date :
Place : (NITIN CHHABRA)
September 16th, 2011 at 3:59 pm
SIDDHARTH ULLAL
+91-8088431674
siddartha.ullal@gmail.com
Objective:
Seeking a position to utilize personal skills, technical skills and qualifications, being resourceful, innovative and flexible for the both individual as well as the organization’s growth.
Educational Qualifications:
B.E(Mechanical) St. Joseph Engineering College, Vamanjoor VTU 2011 74.68%
P.U.C St. Aloysius
Pre-University College, Mangalore, Karnataka State 2007 87.83%
S.S.L.C Vishwamangala High School, Konaje Karnataka State 2005 92.48%
Software Skills:
Languages known : C
CAE Tools : Solid Edge v18, Ansys v12, seeNC Turn, seeNC Mill, Catia v5*
Project Management Tools : Primeavera P6v7
Operating Systems : Windows 9x/ 2000/ XP/ Vista/ Seven
Other Tools : Microsoft Word, Excel and PowerPoint
Achievements:
• Awarded SECOND PLACE among students of SJEC, in the First Year examinations conducted by VTU, Belgaum during the academic year 2007-08.
• Awarded for having attained distinction in Computer Science subject in the Second Year Pre-University Examination.
Extra Curricular Achievements:
• Undergone an industrial training conducted on “Basic Hydraulics and Pneumatics” organized by the VTU- Bosch Rexroth Centre of Competence in Automation Technology, Mysore.
• Participated in an industrial visit to MCF and KIOCL at Mangalore.
Strengths:
• Ability to deal with people diplomatically, team facilitator and hardworker.
• Good communication skills
• Adaptable and flexible
Academic Project:
Design and Fabrication of Automatic Coconut De-husking Machine
Personal Profile:
Date of Birth : 07/07/1989
Sex : Male
Marital Status : Single
Nationality : Indian
Languages Known : English, Kannada and Hindi
Permanent Address : #22-103/1, Near A.R.S, Ullalbail, P.O. Ullal, Mangalore – 575020
Hobbies : Music, Travelling, Cricket.
Declaration:
I hereby declare, that all the information given above is true to the best of my knowledge.
Place: Bangalore
(SIDDHARTH ULLAL)
September 21st, 2011 at 8:06 pm
Arvind Kumar
C/o- Rajeshwar Prasad,at-bandhgora site,via-chas
P.O-Satanpur, Bokaro-828140, Jharkhand.
E-mail – arvindkumar87060@gmail.com
Contact No. – 09960877498
CAREER OBJECTIVE
Seeking a challenging position in an organization to work positively, progressively and proactive manner by constantly innovating and working with a positive attitude, which help in the growth of the organization as well as reaching the zenith of careers.
EDUCATIONAL QUALIFICATION
Examination Institute University %age Year Remark
Final
Year,Engg DYPCOE,Akurdi,Pune Pune University 74.86
2010-11 First Class with Distinction
3rd Year,Engg DYPCOE,Akurdi,Pune Pune University 68.80 2009-10 First Class with Distinction
2nd Year,Engg DYPCOE,Akurdi,Pune Pune University 66.20 2008-09 First Class with Distinction
1st Year,Engg DYPCOE,Akurdi,Pune Pune University 63.15 2007-08 First Class
12th BISS,Sec-3/a,Bokaro CBSE 70.80 2004-05 First Class with Distinction
10th BIV,Sec-2/a,Bokaro CBSE 63.2 2002-03 First Class
E
Engg Aggregate:68.43%
SUMMER TRAINING
? Organization’s Name : BOKARO STEEL PLANT (SAIL),BOKARO
? Project Title : Engineering Workshop
? Duration : 2 Week
? AREA EXPLORED : Engineering machine shop,IMF,PS,SF,FS,CRM,HRM,SMS-1&2,BF
ADDITIONAL PROJECT DONE
? DESIGNED, SIMULATED, FABRICATED & MANUFACTURED AN ALL TERRAIN VEHICLE (ATV 4-Wheeler) UNDER BAJA SAE INDIA 2010 & BAJA SAE INDIA 2011.
? Final year project done on ATV ADJUSTABLE GROUND CLEARANCE SYSTEM.
TECHNICAL SEMINAR
? Had given presentation on design of ATV at India Habitat Centre, Delhi 2010
? Had given technical paper presentation on VEHICLE DYNAMICS in college
EXTRA CURICULAR ACTIVITY
? Participated in SAE BAJA WORKSHOP 2010 organized by SAE Collegiate club of Sardar Patel College of Engg, Mumbai.
? Participated in Techno teaser which was a state level event organized under Perception 2008 by V.I.I.T,pune.
? Organised Paper Presentation in a state level event under Technozest 2009 in D.Y.Patil College Of Engg, Akurdi.
? Organized “CAR ASSEMBLY WORKSHOP” during college state level tech fest TECHNOZEST in 2010 & 2011.
SOFTWARE PROFICIENCY
? Application Software: AUTOCAD, CATIA.
? Office Packages: MS-Office 2003 -2007 (MS-Word, Excel and MS PowerPoint).
PERSONAL QUALIFICATION & ACHIVEMENT
? Member of Society of Automotive Engineers (SAE).
? Worked as CHAIRPERSON of SAE COLLEGIATE CLUB of D.Y Patil College of Engineering, Pune.
? Secured 9th rank All over India in BAJA SAE INDIA 2010 ATV RACING COMPETITION.
? Won 3rd prize at BANGALORE INTERNATIONAL AUTO EXPO ATV UNIV CHALLENGE.
? Won 1st prize in TECH & INNOVATION category in BAJA SAE INDIA 2011 & stood 6th in all over india
? GATE score-425,AIR rank-5508
PERSONAL SKILLS
? Ease and quick in grasping new things,
? Good communication skills and leadership qualities,
? High sense of responsibility and dedication towards work,
? Positive attitude focusing on personal and organizational development,
? Able to drive in a team environment with good spirit.
PERSONAL PROFILE
Father’s Name = Shri. Rajeshwar Prasad
Mother’s Name = Smt. Malti devi
Date of Birth = 19-09-1987
Languages Known = English, Hindi, Nagpuri, Bengali,Marathi
Hobbies & Interests = Traveling new places & learning new languages
watching cricket, surfing internet, chatting with friends
Permanent Address = C/o –Rajeshwar prasad,At-Bandhgora site,P.O-Satanpur
Via-Chas, Bokaro-828140, Jharkhand
DECLARATION
The above achievements are a measure of my sincerity and capability to work in teams and successfully execute any enterprising work. And to the best of my knowledge the above information is true and fair.
(Arvind Kumar)
October 4th, 2011 at 7:55 pm
I am working with Taco group at IPD Hinjewadi which is a leading vender group of Tata for manufacturing auto-compnent. My job is as packaging developer and logistic maintenace. So if their is opportunity to connect with VW ,kindly contact. on mobile no. 9527028300
October 5th, 2011 at 9:14 pm
Objective:
To be associated with an organization which provides to bring out my inherent and latent abilities that involve in Business development, where I can utilize my Intellectual as well as my technical skills effectively to grow along in the organization & To Excel in Customer satisfaction
Organizational Experience:
Company Name: Mahindra and Mahindra
Farm Equipment sector
Kandivali (E) Mumbai
Department: Quality Assurance
Designation: Assistant Manager
Experience: 3 years and 2 months
Job profile: Assure Quality of mfg process and Outgoing Products
? Formulate and implementation of Quality Assurance Systems in assembly shops & development of systems in new plant
? Conducting Initial Quality Study (IQS)
? Resolving the issue observed during IQS
? Coordinating activities of IQS show with design and Mfg teams
? Eliminating the problems in Repairs per hundred (RPH) & Leakages per hundred (LPH) during manufacturing.
? Solving Warranty Problems for International and Domestic products
? Involvement in New product development as a CDT member
? Ensuring quality of the outgoing product by Conducting Gate audit of Products
? Conducting Process Audit to ensure adherence of Quality systems on assembly line
? Resolution of Production line issues by conducting ORC’s and QIT
? Ensuring Adherence to Quality systems for New Product Development
? Certifying Quality of the New Products
? Conducting Gate Clearance reviews for New Product Development process for International Products
? Supporting Design department in resolving problems on New Products
? Resolving customer problems such as CVL, FTR.
? Conducting PPAP and PFMEA for New Products and running changes in the existing products
? Point Leader from QA for Cabin tractors, Compact Tractors Quality and all New International Products
? Warranty cost settlement for export (MUSA and ROW) products
? Development of components / Fixtures (problem related) at supplier’s end.
? Promoting the labor for participation in kaizen, CIT & QC convention.
? Measuring, analyzing & improving for stockyard rejection for tractor.
? Cost Re engineering
? Visiting Stockyard, dealers & customers for feedbacks & actions on the same.
? Implementation of NSIC (No Single Irritated Customer) – Through Customer satisfaction & Continuous improvement process by:
1. Reduction in internal customer’s component rejection.
2. Tracking & reduction of Component rejection.
3. Analyze in-house Quality problems & implement solution of problem through CFT approach.
Major Projects Handled
1. 8560 Cabin Project
Key highlights
? Establishment of cabin assembly line
? Establishment of cabin PDI process
? Preparation of cabin checklist
? Reduction of Cabin RPH from 8500 to 800 in 6 months
? Resolution of cabin related issue raised by customer ( Mahindra USA)
? Process improvement done at supplier end(FMCEL) resulting in reduction in defects from supplier and increase in production at FMCEL
2. 35 series Compact project (Gear, HST and PST)
Key highlights
? Establishment of Compact assembly and PDI line
? Reduction of Compact RPH from 3500 to 320 in 12 months
? Resolution of after sales issues by finding root cause and taking corrective action in plants and at supplier end
? Detection of major issues in HST unit of Eaton in-house , thus avoiding customer dissatisfaction
3. 35 series Compact Cabin Project (Gear, HST and PST)
Key highlights
? Preparation of failure mode directory from the learning’s of cabin and 35 series compact project
? Implementation of learning’s at the design stage to give first time right product to the customer
? Involvement in QFD analysis of Compact cabin
Professional achievements
? Silver award in SBQ divisional award in the Gen X category for F10
? Star of the Quarter for Start of MNPD process for export tractors for F10 Q3
? Star of the Quarter for reduction of regular product RPH for F11 Q3
? Star of the month for establishing process for new product inspection in-house
? Star of the month for Establishment of oil filtration unit and Monitoring NAS value of Oil
? Star of the month for Reduction in compact tractor RPH
? Star of the month for reduction of Cabin Tractor RPH
Company Name: Lakozy Motors, Kalina, Mumbai
(Dealers of Nissan and Toyota Vehicles)
Department: After Sale Service
Designation: Trainee
Experience: June 07 to August 07
Job profile: Pre Delivery Inspection after service
? Analysis of the Vehicles coming for Service
? Pre Delivery Inspection of the vehicles after the service
? Dealing with customer for resolution of the queries related to products
Training Undertaken
? Statistical design making, MMDC, Nasik.
• -Key Learning: Quality tools, Statistical analysis for problem resolution
? PPAP Training, Mumbai.
- Key Learning: PPAP process for new product
? PFMEA Training, Mumbai.
- Key Learning: PFMEA process for new product
? Negotiation Training, Mumbai.
- Key Learning: Various Negotiation skills.
? Shop floor training in Transmission / Engine assembly & machining line at Kandivali & Nagpur plants for 4 months
- Key Learning: All machining processes& assembly process for Transmission, Engine & Hydraulic Aggregate
Educational Qualifications
Year Examination Passed Name of the Board/ University Percentage of Marks Class
First Year May-05 MUMBAI 66.4 FIRST
Second year May-06 MUMBAI 71.1 Distinction
Third Year May-07 MUMBAI 77.5 Distinction
Final Year May-08 MUMBAI 81 Distinction
Sr. No Examination Passed Name of the Board/ University Year of Passing Percentage Obtained
1 S. S. C. MUMBAI Mar-02 85.4
2 H. S. C. MUMBAI Mar-04 85.7
Additional Qualification
? Completed Diploma Course in “Quality Management” from British standard institute
October 7th, 2011 at 7:19 pm
GOTHANDARAMAN.M
? E-Mail: gothan2050@gmail.com ? Mobile: 9840880197
Vision:
To chalk out a career which quenches my thirst for learning and provides an opportunity to challenge the status quo and aim for better, safer and faster.
Skills and Abilities:
• Good Team player, Goal Oriented.
• Optimistic, Confident, hard working, duty conscious, quick learning.
• Good Communication, organizational and management skills.
• Ability to learn new and work effectively with all levels of employees.
• Ability to convince others, Ability to adapt changes.
• Self starter with ability to multi task.
• Positive approach, Self-Learning capability
Technical Skills:
Operating System : Windows’95/98/XP
Packages : MS-Word, MS-Excel & MS-Power point
Area Of Interest:
? Trim assembly
? Chassis assembly
? Final assembly
? Repair process
? Quality operating system
Professional Experience :
Having experience in Trim, Chassis, Final assembly line process and run the line without down time due to process. Meet the production target day-to-day basis.
CURRENT EMPLOYMENT
Ford India Ltd, Chengalpattu. May 2004 – Till date
About Ford: Ford India Limited is a subsidiary of ford motor company is the largest truck and largest car manufacturer in the world and pioneer in inventing Qs system, a bible for all automobile units in the world.
Designation: Production associate
Responsibilities:
? Managing the entire trim, chassis& final line operations of endeavor line.
? Planning of manpower based on production schedule.
? Implementing quality operating system in assembly line
? Calling of external agencies like incoming quality,maintenance based on issue to avoid down times
? On line repair and off line repair
? Rejection parts salvaging due to manuf.defects
? Maintaining the calibration status of tools and torque wrenches
? Preparing quality process sheet (process instruction).
? Preparing buy off check sheet for all the stations
? Doing rejection review and binning of rejections to respective department based on the issues.
? Analyzing the vehicle manual assy sheet (VAM) and drawings to solve the process related issues
? Preparing QS & EMS audit documents
? Managing the natural work group meetings
? Maintaining the team score card
? Work balance board readiness
? Training class for the team members
BRIEF SUMMARY ON INDUSTRIAL EXPERIENCE:
? Controlling of SC AND CC process characteristics supporting the torque monitoring team and updating the SPC charts
? Closing internal audit NC
? maintaining the non production materials
? Updating job versatility and job certification sheet for the operators
? Controlling of material flow with MIN-MAX levels.
? worked with quality and engineering team to solve the process issues
? worked with body and paint team related concerns
? worked with launch team for the new model launch
? Doing process audits in stations
? Processing the request of NPM
? Follow up the cars in quality acceptance area and S&R,water test
EXPERTISE ACQUIRED:
? Quality operating system
??TS 16949 audit preparations
? Problem solving by using QC tools
? Manpower allocation and cycle time calculation based on the production target.
? Monitoring the the issues in Q stations and identifying the root cause by using KOEO, ECOS
? Lean manufacturing concepts
? Ensuring the safety by closing the near miss
? FMEA
SPECIALLY TRAINED ON:
? Kaizen
? Near miss
? Poke Yoke
? 5s
? FPS (ford production system)
? Industrial safety
? Visual factory
? SPC
ACHIEVMENTS:
? Best kaizen award.
? Best safety promotion award
? Natural work group project presentation in plant wide competition
? Value stream mapping project implementation
? HPV improvements
? Appreciated for Endeavor Build support.
? Appreciated for cost effective salvaging actions. ?
Previous Employment:
APEX POWER ELECTRONICS From Aug 2002 – May 2004
Department: production & service
Designation: production service eng.
Academic Profile :
? BE from Anna University (MIT), standing with 60% during period (2007-2010).
? Diploma in Electrical & Electronics Engineering from P.V Polytechnic, Tindivanam, standing with 86% during period (1999 – 2002).
? SSLC from government high School, veeranamur, standing with 70% during period (1999)
Personal Profile
Name : Gothandaraman.M
Father’s name : Mr. E.Mani
Gender : Male
Nationality : Indian
Martial Status : Single
Date of Birth : 18/05/1984
Address : Boanthai village
Veeranamur (PO)
Gingee (TK)
Villupuram district.
PIN- 604203
Language Known : English, Tamil.
Declaration:
I hereby declare that the particulars furnished above are true and correct to the best of my knowledge.
Station: Yours Truly,
Date: (Gothandaraman.M)
October 7th, 2011 at 7:21 pm
GOTHANDARAMAN.M
? E-Mail: gothan2050@gmail.com ? Mobile: 9840880197
Vision:
To chalk out a career which quenches my thirst for learning and provides an opportunity to challenge the status quo and aim for better, safer and faster.
Skills and Abilities:
• Good Team player, Goal Oriented.
• Optimistic, Confident, hard working, duty conscious, quick learning.
• Good Communication, organizational and management skills.
• Ability to learn new and work effectively with all levels of employees.
• Ability to convince others, Ability to adapt changes.
• Self starter with ability to multi task.
• Positive approach, Self-Learning capability
Technical Skills:
Operating System : Windows’95/98/XP
Packages : MS-Word, MS-Excel & MS-Power point
Area Of Interest:
? Trim assembly
? Chassis assembly
? Final assembly
? Repair process
? Quality operating system
Professional Experience :
Having experience in Trim, Chassis, Final assembly line process and run the line without down time due to process. Meet the production target day-to-day basis.
CURRENT EMPLOYMENT
Ford India Ltd, Chengalpattu. May 2004 – Till date
About Ford: Ford India Limited is a subsidiary of ford motor company is the largest truck and largest car manufacturer in the world and pioneer in inventing Qs system, a bible for all automobile units in the world.
Designation: Production associate
Responsibilities:
? Managing the entire trim, chassis& final line operations of endeavor line.
? Planning of manpower based on production schedule.
? Implementing quality operating system in assembly line
? Calling of external agencies like incoming quality,maintenance based on issue to avoid down times
? On line repair and off line repair
? Rejection parts salvaging due to manuf.defects
? Maintaining the calibration status of tools and torque wrenches
? Preparing quality process sheet (process instruction).
? Preparing buy off check sheet for all the stations
? Doing rejection review and binning of rejections to respective department based on the issues.
? Analyzing the vehicle manual assy sheet (VAM) and drawings to solve the process related issues
? Preparing QS & EMS audit documents
? Managing the natural work group meetings
? Maintaining the team score card
? Work balance board readiness
? Training class for the team members
BRIEF SUMMARY ON INDUSTRIAL EXPERIENCE:
? Controlling of SC AND CC process characteristics supporting the torque monitoring team and updating the SPC charts
? Closing internal audit NC
? maintaining the non production materials
? Updating job versatility and job certification sheet for the operators
? Controlling of material flow with MIN-MAX levels.
? worked with quality and engineering team to solve the process issues
? worked with body and paint team related concerns
? worked with launch team for the new model launch
? Doing process audits in stations
? Processing the request of NPM
? Follow up the cars in quality acceptance area and S&R,water test
EXPERTISE ACQUIRED:
? Quality operating system
??TS 16949 audit preparations
? Problem solving by using QC tools
? Manpower allocation and cycle time calculation based on the production target.
? Monitoring the the issues in Q stations and identifying the root cause by using KOEO, ECOS
? Lean manufacturing concepts
? Ensuring the safety by closing the near miss
? FMEA
SPECIALLY TRAINED ON:
? Kaizen
? Near miss
? Poke Yoke
? 5s
? FPS (ford production system)
? Industrial safety
? Visual factory
? SPC
ACHIEVMENTS:
? Best kaizen award.
? Best safety promotion award
? Natural work group project presentation in plant wide competition
? Value stream mapping project implementation
? HPV improvements
? Appreciated for Endeavor Build support.
? Appreciated for cost effective salvaging actions. ?
Previous Employment:
APEX POWER ELECTRONICS From Aug 2002 – May 2004
Department: production & service
Designation: production service eng.
Academic Profile :
? BE from Anna University (MIT), standing with 60% during period (2007-2010).
? Diploma in Electrical & Electronics Engineering from P.V Polytechnic, Tindivanam, standing with 86% during period (1999 – 2002).
? SSLC from government high School, veeranamur, standing with 70% during period (1999)
Personal Profile
Name : Gothandaraman.M
Father’s name : Mr. E.Mani
Gender : Male
Nationality : Indian
Martial Status : Single
Date of Birth : 18/05/1984
Address : Boanthai village
Veeranamur (PO)
Gingee (TK)
Villupuram district.
PIN- 604203
Language Known : English, Tamil.
Declaration:
I hereby declare that the particulars furnished above are true and correct to the best of my knowledge.
Station: Yours Truly,
Date: (Gothandaraman.M)
October 10th, 2011 at 1:53 pm
Dijelovi za ormare i kuhinje…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
October 12th, 2011 at 11:56 am
RAHUL KUMAR Email id: rahulkumar_9007@yahoo.com Phone Number: 91-9604895704
Address: D-3,room no.-101,kunal
icon,pimple saudagar,pune
Pin code-411027
Objective: To be a successful professional by utilizing my skills and enable further personal and professional development, working towards the prosperity of the organization.
Academics Chronicle:
Degree: Completed B.tech(2007-2011) in Mechanical Engineering from Vellore Institute of Technology,Vellore.
CGPA: 8.33 / 10
Semester Results
Semester I II III IV V VI VII VIII
GPA 7.95 8.30 8.18 7.88 8.22 8.57 8.46 9.00
CGPA 7.95 8.14 8.15 8.08 8.15 8.20 8.24 8.33
12th Std.: BIEC 2006 61.89%, K.S.S college,lakhisarai,Bihar.
10th Std.: BSEB 2004 72.1%, K.R.K high school,lakhisarai,Bihar.
Achievements:
• Second highest marks(97%) in mathematics in 10th board examination(BIHAR board).
• College “second topper” in intermediate examination (BIHAR board) and also got distinction marks in mathematics.
• Published paper in Advanced Materials Research(vol.311-313)p.p-303.paper topic is Impact Analysis of Aluminium-Fibre Laminated Composite by using ANSYS.
Industrial Training Experience:
• Undergone four weeks Industrial training at Indian Oil Corp. Ltd., Barauni from 20th May -19th June, 2009 and exposed to technical aspects of coal handling and processing, design of boilers and related heat calculations, turbine, water treatment and Demineralization process, Electrostatic precipitator and other ash handling methods and optimization of power output.
Projects:
1. FABRICATION AND ANALYSIS OF WATER JET CUTTER (HARDWARE PROJECT)
• Fabrication of apparatus for water jet cutting using set of nozzles, self-priming pump etc.
• Analysis of the water jet speed and the cutting speed.
2. DESIGN OF TEST RIG FOR MAGNETORHEOLOGICAL DAMPER(DESIGN PROJECT)
• Detailed analysis of design of test rig for Magneto-rheological Damper.
Workshop Attended:
• Undergone AUTOCAD training by certified AUTOCAD trainer from 17th – 22nd August, 2009 with excellent grade.
Skills:
• Language: C, C++.
• Application Software: Solid Works 2008, AutoCAD,ANSYS
Extra Curricular Activities:
• Active member of “INSTITUTE OF ENGINEERS (INDIA)”.
• Active member of “SAE-INDIA”.
• Participated in “zenith” event in sadhana 2008 (technical fest.) at “VIT University”
• Participated in “Contraption and Nautica” in “GRAVITAS 2009 (technical fest.)” organized by “VIT UNIVERSITY”.
• Cleared up to dwitiya sopan of Indian scout and guide at district level.
Other Informations:
• Area of interest-MATHEMATICS, DESIGN OF MACHINE ELEMENTS,STRENGTH OF MATERIALS
• Hobbies-music, movies, roving
• Knowledge of elementary German.
Declaration:
I hereby declare that the above mentioned particulars are true to the best of my belief and knowledge.
Yours Sincerely,
(RAHUL KUMAR)
October 17th, 2011 at 11:24 am
ABHISHEK PRATAP
Career Objective
To work in a harmonious environment with a progressive organization that shall enable me to improve my skill-sets and help me build a career involving my Passion for technology.
Academic Details
Graduation
Institute:
eemed University
Birla Institute of Technology, Mesra,INDIAUniversity
Degree:
B.E (Bachelor of Engineering)
Discipline
Mechanical
8th Sem
April 2011:
6.947th Sem
December 2010:
6.69
6th Sem
April 2010:
6.195th Sem
December 2009:
6.12
4th Sem
April 2009
: 6.13
3rd Sem
December 2008:
5.88
2nd Sem
April 2008
: 6.71
1st Sem
December 2007:
6.47
CGPA:
6.39(on a scale of 10)
Schooling
H.S.C:
Kendriya Vidyalaya No.3 Surat
C.B.S.E
April 2007
65.6%
S.S.C:
Kendriya Vidyalaya No.3 Surat
C.B.S.E
April 2005
69.2%
Technical Skills
Programming Languages1. Elementary Knowledge of C & C++
2. Basic knowledge of HTML
Operation Systems1. DOS,
2. Windows 95/98/NT/ME/XP/vista/7
Office Automation Tools
Microsoft office package: Microsoft Word, PowerPoint, Excel. etc
Design Software 1. Auto cad
2. CATIA
3. Google sketch up
Involvement with organizations or Student bodies
1.
IEEE students chapter2
SAE INDIA: The engineering Society for advancing mobility on land, sea, air and space.
Subjects of Interest
* Automobile Engineering.
* Manufacturing Processes.
* Internal combustion engines and gas turbines.
* Power plant engineering.
* Strength of materials.
* Theory of Machines.
* Heat and mass transfer.
* Fluid Mechanics and machineries.
* Design of mechanical elements.
* Refrigeration and air conditioning.
Projects undertaken:-
1.
Wireless controlled all terrain vehicle presented at BIT-Mesra.
The vehicle having ability to move over all kinds of terrain (sand, marshy land, water, fire, highly non uniform surfaces ) and can be controlled from a distance of 30mt wirelessly.
2.
Wireless controlled Land Robot presented at NIT-Patna
The robot having ability to move 360 degree on the base and can pick up wooden boxes of 300 gm and can be controlled from a distance of 30mt wirelessly.
3.
Dual frequency based land robot presented at BIT Patna.
The robot runs on land and can pick up TT Balls.The robot has a dual frequency control system in case of frequency clashing problem.
4.
Traction control of vehicles at NIT Surat (Auto fest).
Study of various factors responsible for traction of vehicle and implementing them in traction control of the vehicle.
5.
Hybrid engineering used in power generation.
This is a project on the production of power by combining various renewable sources of energy and using the power produced for domestic as well as commercial purpose, and new methods of storing the energy produced.
Industrial Projects
1.
Study and Analysis of Gas turbine Mark 4 control system at ONGC Hazira
Project deals with commissioning and automation of gas turbine which generates electricity for ONGC
2.
Study and maintenance of various mechanical equipments at ONGC Hazira.
Project deals with study and maintenance of two and four stroke engines, reciprocating and centrifugal compressors and pumps, cooling towers
3.Analysis of instrumentation and Metering system at ONGC Hazira.
Project involves the various type of instrumentation and metering system at ONGC Hazira.
Seminars, Research Paper and Model Presentation
1.
Automation in car assemblySeminar given at BIT Mesra.
2.
Environmental management (model city)
Model got the third price at state level science exhibition at Baroda.
3.
Hybrid power generation (paper)
Seminar and paper presented at BIT Mesra (Patna).
Industrial Visits
1. Visited the oil drilling rig at ONGC Nagira Assam
2. Visited ONGC Hazira gas Processing complex
3. Visited Bokaro thermal power plant.
4. Visited Patna solar energy production station.
Technical Trainings:
1.Advance certificate course in CATIA
CTTC Bhubaneswar
(A Govt. of India society.)
Dated:05/06/2010-30/06/2010
-Conventional machining
-Introduction to CAD/CAM/CAE
-Part design
-Generative surface design
-Assembly design
-Kinetic simulation
-Drafting & detailing
2.
ONGC Hazira (Minor Training)
Dated:19/05/2009-25/06/2009Study and maintenance of various mechanical equipments
Two and four stroke engines, reciprocating and centrifugal compressors & pumps, cooling towers, valves.
3.
ONGC Hazira (Major Training)
Dated:12/05/2010-04/06/2010 * Analysis of mach 4 Gas Turbine control system.
* Mechanical maintenance of Gas turbine.
* Study and implementation of re-commissioning process of the gas turbine.
Extra-curricular activities
* Acquired Certificate of Appreciation in CADD Quest at NIT Jalandhar.
* Acted as Event Managing Director at Technika’10(annual techno-management festival) held at BIT Patna.
* Second position in inter house discuss throw competition held at Kendriya Vidyalaya O.N.G.C. Surat GUJARAT.
* Represented kendriya vidyalaya O.N.G.C. Surat at pre regional Table Tennis competition.
* Third position in 4*100 m men relay race at kendriya vidyalaya ONGC Sibsagar, Assam.
* House captain of Tagore house in kendriya vidyalaya O.N.G.C. Surat, Gujarat.
* Successfully completed the adventure course and acquired proficiency in elementary skills of rock climbing, rappelling, river crossing, trekking, camping, jungle craft, survival and leadership certified by Government of Himachal Pradesh (INDIA).
Achievements
* I am a “Certified CATIA DESIGNER” from Central tool room & training centre (CTTC) A Government of India society under Ministry of MSME Bhubaneswar.
* Second Position in state level science exhibition held at Kendriya Vidyalaya No.1 harni road Baroda GUJARAT.
* First position in Wireless controlled all terrain vehicle presented at BIT-Mesra and a cash price of Rs 10,000/-.
* Third position in robotics at Technika’09 BIT Patna and a cash price of Rs. 2500/-.
* Second position in animation at Techniche’09 IIT Guwahati and a cash price of Rs 2500/-.
* Got letter of recommendation from Metawing Technologies PVT.LTD for TECHNIKA 2010 (annual techno-management festival) BIT Patna.
* Second position in car design contest at TechNiti’07 at NIT Jalandhar.
Personal Details
Name: Abhishek Pratap
Mother’s name: Mrs. Sangeeta Pratap (Post Graduate (zoology))
Father’s name: Mr. Mahendra Pratap ( Deputy General Manager, O.N.G.C.)
Date of Birth: 14th September 1989
Gender: Male
Correspondence Address/Permanent Address:
Flat no. 804;
Surbhi Apartments;
Near reliance township;
Piplod, Surat, Gujarat -395007
INDIA
E-Mail:
abhishekpratap3@gmail.com
Phone :+91-261-2258105
MOB:+91-7405446315
Nationality: Indian
Hometown: Patna (Bihar).
Marital status: Single
Language known: Hindi & English
Strength: 1. Hard Working
2. Self Disciplined
3. Ability to meet deadline with good time management skill.
4. Believe in myself
Hobbies: Reading books of Stephen Hawking & APJ Abdul Kalam, Exploring India & World,playing table tennis, badminton, and cricket.
Declaration
I here by declare that the information furnished above is true to the best of my knowledge.
Abhishek Pratap
References:-
Mr. D.P Singh
Professor & Head of Department
Mechanical Engineering
Birla Institute of Technology, Mesra (Patna).
Dr. Pradeep Choudhary
Assistant Professor
Mechanical Engineering
Birla Institute of Technology, Mesra (Patna).
Ph: +91-9973144653
Industrial Project mentor:-
Mr. K. Radhavinod
Deputy General Manager
Mechanical
Hazira Gas Processing Complex.
ONGC – Surat
Mr. Anil Kumar
Chief Engineer
Mechanical
Hazira Gas Processing Complex.
ONGC – Surat
October 25th, 2011 at 9:25 pm
RESUME
MACHINDRA PANDURANG PARANDWAL
Contact :- 9923409953 / 8888811768 / 9922914620
mpparandwal@endurance.co.in, machindra_p@rediffmail.com
Qualification Details
Academic
B.com Examination Passed with Pass class from Pune University
Professional
Post Graduation Diploma in Business Management (PGDBM) with higher second class from Pune University.
Master in business studies (MBS) university of pune appearing from Aug 2011- April 2012
TECHNICAL SKILLS
? Win XP / NT ? FoxPro ? UNIX ? MS Office
? Internet ? SAP ? ERP ? LOTUS Notes 6.5
? DOS
Professional Training Attended
? Kaizen & 5S ? KANBAN ? ERP
Major Contributions (Achievements)
Improved Store’s stock accuracy from 60% to 99%
Reduction in Truck-around time from 3 hours to 0.5 hours
Changed systems for storage of RM & All parts (Reduced / Saved space unto 250%)
Cost saving of Rest. 2 Lac through material stores bins we use old corrugated boxes.
AREAS OF EXPERTISE
Stores (RM/BOP/FG)
Monitoring All Daily Receipts in Book as well as in physical.
Monitoring material issues to shop floor as well as physical movement of material.
Monitoring & maintaining All Internal & External Rejection Related activity.
Implemented FIFO Systems for all stores parts to their classifications.
Controlling & checking of various types of challans made for processing items, Returnable / Non Returnable, Rejected Items.
Conduct physical Verification of inventory on periodic basis. & reconciling with systems.
Monthly Presentation for Inventory lying at Stores & Various Reports to MIS
Monitoring & controlling Stock Level MSL, EOQ, ROL, Safety Stock, Non-movable items.
Responsible to insure 100% requirement of customers in term of JIT
Responsible to insure the material availability to every next customer
Co-ordination with planning Dept for dispatch of finished products.
Taking proper care of packing of finish product as per customers requirement for Domestic as well as Export Dispatches.
Excise /Indirect Taxation
Keeping Record of Cenvat copy, 4(5)a & b Challans of Vendors & Customers
Reconciliation of All Vendor Items & Customer Supplied Product at defined frequency
Preparing 4(5)a/b, Subsidiary Challan, Its Reconciliation & Follow up the materials.
Export & Import
Preparing Export Documents (Invoice, Packing list, etc).
Dispatching material along with export document.
Follow up for Proof of Export – CHA & Customs
Sending all the required document to CHA (Invoice, Packing List, Airway bill etc)
Follow with CHA for Clearance of consignment.
Maintaining Export Sales register.
Logistics
Supervising daily Logistics Operation. & cost saving in transportation cost.
Discussion & follow up with Suppliers for Logistics improvement and KANBAN system.
Responsible for all types of transportation & their cost, to ensure
ORGANISATIONAL DETAILS
ENDURANCE TECHNOLOGIES PVT. LTD – CHAKAN Pune (Alloy Wheel)
Company Profile :- An Engineering Industry into Aluminum castings. Plant started in March’ 2006. For this year set the plant target 450 Corers. Group Turnover in 2000 Corers. Major Customers is Bajaj Auto – Chakan, Bajaj Auto Waluj, Yamaha Motors, Tata Motors etc
Job Profile :- From Sept 2006 working as a Sr. Stores Supervisor. Independent Responsible for All Stores Activity, Dispatch, Two Trainee Supervisors & Reporting to Manager. Stores & logistics.
LUMAX AUTO TECHNOLOGIES – CHAKAN PUNE
Company Profile :- An engineering company a part of Lumax Industries ltd. Automotive lighting for Four Wheelers & Two Wheelers Vehicles manufacturing in India.
Job Profile :- From Dec. 2004 Worked as commercial assistant Looking all stores receipts & line feeding activity. Dispatches to customers according to customer requirements & Plan.
MINDA INDUSTRIES LTD. – Chakan PUNE
Company Profile :- It is a part of Minda Group, manufacture of Auto Electrical Parts. Major customers are Bajaj Auto ltd. Yamaha Motors, Tata Motors Ltd, Royal Enfield Etc
Job Profile :- From June 2002 to Nov 04 Worked as Member Stores Looking all stores activity, all material movement inward to outward process.
Last Revision :- Aug’ 2011
Machindra P. Parandwal.
October 27th, 2011 at 2:16 pm
Find and buy best prepaid telephone cards for international telephone calls. Search best rates from a variety of telephone cards. Buy card online and receive instantly. Only reliable suppliers. You can use it to place an international call home anywhere at any time. Best rate for calling to every country..
October 30th, 2011 at 5:09 pm
SWAROOP. M
A-15, Geethanjali, Sector-17, Vashi, Navi Mumbai
Email: swaroopmoothamana@gmail.com
Phone: +917738646016, 022-27894112
Objective :
To seek a challenging career opportunity in a competitive environment where I would be able to make use of my abilities and skills towards the growth of the organization and enhance my knowledge and experience in my field of specialization.
Strengths & Skill set :
Knowledge of AutoCAD.
Education :
B.E- Mech Kirupananda Variyar Engineering College, Salem Vinayaka Mission University 2011 69.19%
D.M.E Anndavar Polytechnic College, Gobi Department of Technical Education, Government of Tamil Nadu 2008 72.88%
SSLC Vidyadhiraja VidhyaBhavan Central School, Mekkad Central Board of Secondary Education 2005 54.00%
Training & Certifications :
- Internship in National Institute of Oceanography, Goa (Council of Scientific & Industrial Research)
- Trained in General Seal Pvt Ltd.(ISO:9001- 2008).
Academic Projects :
AUTOMATIC PNEUMATIC SHAPING MACHINE (2008)
? Project work done for the Diploma in Mechanical Engineering.
The project involved the manufacturing and development of a pneumatic shaping machine. It consisted of a pneumatic double acting cylinder which is operated with the help of a solenoid valve. A microprocessor is used for the automation of solenoid valve. The contribution of our team to this project was to fabricate the automatic pneumatic shaping machine.
DESIGN OF ENCLOSURE FOR SMALL LOW POWER PRESSURE SENSOR (2011)
? Project work for BE Mechanical Engineering.
? Done during the 1 month internship at the Marine Instrumentation Division, National Institute of Oceanography, Goa.
The project involved the design, development and testing of a low power pressure recorder which can be used to record water heights in ocean and in dams, etc. Other uses are also possible. The contribution of our team to this project was to design and test Delrin enclosure for housing the pressure sensor along with electronics and battery.
Personal Profile :
Name : SWAROOP. M
DOB : 17-05-1988
Father’s Name : M.N. ANUJAN
Residential Address : A-15,
GEETANJALI, PLOT – 52,
SECTOR – 17, VASHI,
NAVI MUMBAI,
MAHARASHTRA,
PIN: 400703.
PH: +917738646016, 022-27894112
Permanent Address : MOOTHAMANA (h),
AVANAMCODE,
CHOWARA (PO),
ERNAKULAM,
KERALA,
PIN: 683571.
PH: 0484-2600369
Languages known : Malayalam, English, Tamil and Hindi
November 1st, 2011 at 8:29 pm
RESUME
PERSONAL DETAILS :
• NAME – MILIND PRAKASH JADHAV.
• DATE OF BIRTH – 31/05/1986
• Gender – MALE
• MARITAL STATUS – SINGLE
• NATINALITY – INDIAN
• LIVING LOCATION – MAHARASHTRA
• ADDRESS – 17/15, THIRD FLOOR,
• POLICE CAMP,
SIR POCHKHANWALA
ROAD, WORLI,
. MUMBAI- 400018
• CONTACT NO – 8898141670
• EMAIL ID – milindj110@gmail.com
EDUCATION QUALIFICATION:
• BACHELOR OF ARTS IN PHILOSOPHY (MUMBAI UNIVERSITY) PASSED WITH SECOND CLASS IN 2008
• H.S.C PASSED (ARTS) WITH FIRST CLASS IN 2005
• S.S.C PASSED WITH SECOND CLASS IN 2003
OTHER QUALIFICATION : (ITI) TWO YEAR COMPLETED
TRADE- ELECTRICIAN, (2009-2011)
ELECTRICIAN- 72 %
WORK EXPERIENCE : FRESHER
COMPUTER SKILLS :
• MS-CIT PASSED IN 2005
LANGUAGE KNOWN :
• ENGLISH, HINDI, MARATHI
November 1st, 2011 at 8:30 pm
RESUME
PERSONAL DETAILS :
1 NAME – NILESH VILAS RUMADE.
2 DATE OF BIRTH – 24-10-1987
3 Gender – MALE
4 MARITAL STATUS – SINGLE
5 NATINALITY – INDIAN
6 LIVING LOCATION – MAHARASHTRA
7 ADDRESS – RAM- SHAM CO- SOCIETY
8 BLDG-4, FIRST FLOOR ROOM
NO-107, BHAVANISHANKAR
ROAD, DADAR(W),
MUMBAI-400028.
9 CONTACT NO – 9930336584
10 EMAIL ID – nilesh.rumade619@gmail.com
EDUCATION QUALIFICATION:
1 BACHELOR OF ARTS IN PHILOSOPHY (MUMBAI UNIVERSITY) PASSED WITH SECOND CLASS IN 2008
2 H.S.C PASSED (ARTS) WITH SECOND CLASS IN 2005
3 S.S.C PASSED WITH SECOND CLASS IN 2003
OTHER QULIFICATION : (ITI) TWO YEAR COMPLETED
TRADE – ELECTRICIAN, (2009-2011)
ELECTRICIAN- 74 %
WORK EXPERIENCE : FRESHER
COMPUTER SKILLS :
1 HARDWARE & NETWORKING
2 passed out (CCNA) CISCO CERTIFIED NETWORK ASSOCIATE,JULY (2008)
3 MS-CIT PASSED IN 2005
LANGUAGE KNOWN :
ENGLISH, HINDI, MARATHI
November 2nd, 2011 at 1:14 pm
Dear Sir/ Madam,
I have complited M.COM with ICWAI(Inter) in june 2010.presently i am working with Gabriel India Ltd
and i am very much interested to work with your ccompaqny so please consider me for any job in ACCOUNT AND FINANCE.
November 3rd, 2011 at 7:34 pm
Sir/ Madam,
I am Diploma holder with 20yrs exp in automobile industry and based at pune since 2001.
worked in reputed two wheeler industry -Royal enfield for 16 yrs in the following department .
8 yrs in QA of Engine & vehicle assy and have exposure in process knowledge, testing , final inspection of vehicle as per export standard .Having exposure in TQM /JIT/communication skills .
Also have 8 yrs of exp in after sales function in same company ( Royal enfield ) and worked as a territory manager-service for Mah & Goa . Having exposure in dealer /net work management including customer complaint handling ,warranty management etc.
Attended NIS sparta trg and having exposure in SAP also..
Also worked as a works manager in Eicher commercial vehicle dealer ship.
Looking forward a suitable post considering my vast experience and qualification, in your organization.
November 7th, 2011 at 4:24 am
black diamond engagement rings…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
November 11th, 2011 at 11:41 am
cashflowstatement…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
November 12th, 2011 at 2:11 pm
Curriculum Vitae
Mr. Rajput Pramod D.
Diploma in Mechanical
E-mail :pamrajput@rediffmail.com
Mobile: +91 8149905374
ADDRESS FOR CORRESPONDENCE:
Mukti Co-Op hsg soc.Flat No.A-6,
Opp. Mahindra Sintered Company,
Kamgarnagar.Pimpri,
Pune -411018
Career objective
To Join an Organization wherein growth opportunity are blend with rich learning process and seeking a challenging position with a progressive environment with opportunities for professional growth based on performance & accomplishments
Experience TOTAL YEAR OF EXPERIENCE: 8.5 YEAR
Current Employer: – FINE ARC SYSTEM PVT. LTD. BHOSARI MIDC, PUNE
The company deals in Weld equipment. Robotic Jigs & Fixtures. SPMS Welding Robotics M/C. The esteemed customers of the organization are Benteler automotive, Faurecia Exhaust systems, Force Motors, Sharda Motors Etc.
JOB RESPONSIBILITIES
? Doing technical documentation for various SPM with respect operation of the SPM
? Giving training related to ISO at staff level.
? Helping organization authorities for creating their documentation in respective department
? Worked for GOST_R documentation activities for Faurecia emission control exhaust.
? Implementing poke yoke, Kaizens
? Conducting training for awareness related ISO with respect to departments.
? Conducting internal audits for various department as per ISO norms
? Planning day to day quality checking activity for various projects
? Conducting supplier audits at supplier end.
? Monitoring MRM points stage wise.
? Coordinating with assembly and design department for smooth functioning of production.
? Follow safety rules & Regulations.
PERIOD: AUG.2010 to Till Date.
Organization: - SATGURU CONSULTANTS (PUNE)
The consultancy deals in ISO9001-2000 & TS Certification.
JOB RESPONSIBILITIES
? Working as a team member in ISO related work.
? Working as a team member with AKTRION consultants (U.K.).For their project in TATA MOTORS for paint defect reduction in paint shop.
? Doing documentation for various industries with respect to ISO
? Giving training related to ISO.
? Helping organization authorities for creating their documentation in respective department
? Worked for GOST_R documentation activities for FINEARC Systems Pvt.Ltd.
PERIOD: DEC.2009 to AUG 2010
Organization: - GANAGE PRESSINGS (BHOSARI)
The company deals in press components. Welding assemblies & sub assemblies.
JOB RESPONSIBILITIES
? Planning of daily dispatch and weld line Production.
? Managing the manpower at shop floor.
? Also handling the weld line for Assembly line.
? Production Planning & Monitoring as per Customer schedule.
? Shift & Supervisor planning in order to optimise the production. (By utilisation of resources).
? Development dies setting & Execution.
? Monitoring of machine break down, die maintenance, down time to increase the production & minimize the quality problems.
? Solve technical problems related to dies& Setting.
? Coordinating with QA for smooth functioning of production.
? Active member of red table activity in order to minimise the in-house rejection.
? Implementing poke yoke, Kaizens.
? Follow safety rules & Regulations.
PERIOD: DEC. 2006 TO NOV 2009
Organization: - VARUN ENTERPRISES. (BHOSARI)
The company deals in Automobile, Press parts, Tooling.
JOB RESPONSIBILITIES
? Worked as a Production In charge.
? Handling manpower and planning about day to day production work.
? Purchasing the raw material for component.
? Planning about daily dispatch schedule.
? Handling quality related problems.
? Handling the customer complaints
PERIOD: JAN 2004 TO NOV 2006
? Academic PROJECT :-
“MULTINUT TIGHTER & OPENER
The unit was bevel gear based used mainly in removing wheel from the vehicle. It enables removal of all four bolts simultaneously. The unit was targeted for universal application and to reduce time and energy.
Computer Literacy
• Auto CAD 2010
• MS Office
• End user of SAP QA module.
Academic Profile
Sr.No. Class NAME OF INSTITUTE Board/
University Year
1. DME P.V.P.I.T.INSTITUTE MSBTE 2004
2. H.S.C. SANGLI HIGHSCHOOL SANGLI Kolhapur board 1999
3. S.S.C. SANGLI HIGHSCHOOL SANGLI Kolhapur board 1997
Personal Information
Name: Rajput Pramodsing Dilipsing
DOB: 10/04/1982
Current Address: Mukti Co-Op hsg soc.Flat No.A-6,
Opp. Mahindra Sintered Company,
Kamgarnagar.Pimpri,
Pune -411018
Permanent Address: Mukti Co-Op hsg soc.Flat No.A-6,
Opp. Mahindra Sintered Company,
Kamgarnagar.Pimpri,
Pune -411018
Marital Status: Married.
Languages: Marathi, Hindi, English.
Date :
Place :
November 12th, 2011 at 8:22 pm
RESPECTED SIR,
I am doing my final year of Bachelor of engineering in the field of Electrical and Electronics at PSG College of Technology, Coimbatore. I would like to be a part of your esteemed organization. Kindly convey your off campus placement process.I have included my educational details for your kind reference.
Thanking You,
Yours faithfully,
G.Sambasivam
EDUCATIONAL DETAILS:
1 SSLC PASSED IN 2006 FROM RVS MATRICULATION,SCHOOL, SULUR, COIMBATORE WITH A PERCENTAGE OF 89.45
2 HSC PASSED IN 2008 FROM RVS MATRICULATION,SCHOOL, SULUR, COIMBATORE WITH A PERCENTAGE OF 93.92
3 UNDERGOING BACHELOR OF ENGINEERING IN ELECTRICAL AND ELECTRONICS ENGINEERING FROM PSG COLLEGE OF TECHNOLOGY,COIMBATORE.(PASS OUT YEAR 2012)
CGPA (UPTO SIXTH SEMESTER):9.1 OUT OF 10.
MINI PROJECTS UNDERTAKEN:MINI UPS AND SQUARE WAVE INVERTER.
FINAL YEAR PROJECT:DESIGN AND IMPLEMENTATION OF POWER ELECTRONIC CONVERTERS FOR ELECTRIC VEHICLES.
Yours faithfully,
G.Sambasivam
November 12th, 2011 at 8:25 pm
RESPECTED SIR,
I am doing my final year of Bachelor of engineering in the field of Electrical and Electronics at PSG College of Technology, Coimbatore. I would like to be a part of your esteemed organization. Kindly convey your off campus placement process.I have included my educational details for your kind reference.I also declare that the details furnished are true to the best of my knowledge.
Thanking You,
Yours faithfully,
G.Sambasivam
EDUCATIONAL DETAILS:
1 SSLC PASSED IN 2006 FROM RVS MATRICULATION,SCHOOL, SULUR, COIMBATORE WITH A PERCENTAGE OF 89.45
2 HSC PASSED IN 2008 FROM RVS MATRICULATION,SCHOOL, SULUR, COIMBATORE WITH A PERCENTAGE OF 93.92
3 UNDERGOING BACHELOR OF ENGINEERING IN ELECTRICAL AND ELECTRONICS ENGINEERING FROM PSG COLLEGE OF TECHNOLOGY,COIMBATORE.(PASS OUT YEAR 2012)
CGPA (UPTO SIXTH SEMESTER):9.1 OUT OF 10.
MINI PROJECTS UNDERTAKEN:MINI UPS AND SQUARE WAVE INVERTER.
FINAL YEAR PROJECT:DESIGN AND IMPLEMENTATION OF POWER ELECTRONIC CONVERTERS FOR ELECTRIC VEHICLES.
November 14th, 2011 at 8:04 am
Sit means sit-Definitive source for breed specific dog training….
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
November 15th, 2011 at 1:58 pm
Respected Sir,
Myself Swapnil Deelip Tribhuwan I have completed B.E in MECHANICAL from Aurangabad.
Now i am looking to join industry. Please consider me for suitable vaccancy. Hoping for your positive response
Yours Faithful,
Swapnil Deelip Tribhuwan
B.E (Mechanical)
9970374849
November 15th, 2011 at 10:45 pm
Respected Sir,
I would like to send my resume in the attachment with e-mail. If your organization arrange personal interview. I am ready to attend at anytime as per your convenience.
I will prove myself as a valuable asset for your company.
Thanking you,
sandeep more
November 19th, 2011 at 2:46 am
Dear Sir,
In reference to your advertisement placed in Aurangabad, please accept my resume as an application for the Operation Quality: Officer/Assistant Manager- Operations Analysis (QPA-01) – position available. Your company is well-known in the automotive industry which really makes this opportunity intriguing to me.
I have 4 years of experience (Skoda and Volkswagen) as an technician, supervisor, Sr.Service advisor and have performed all aspects of automotive repair including transmissions, brakes, alignments and diagnostic testing. My vast skills and background would provide you an employee which I believe will greatly benefit the team. Analysing the customer’s problems in the vehicles. Please refer to my enclosed resume for detailed information on my qualifications and experience.
You may contact me at +44(0)7466661416 to schedule an interview. I would like to be able to meet in person to discuss this opportunity further and demonstrate my enthusiasm for the trade in person. Thank you for your time and consideration of my credentials.
Sincerely,
Balaji Naga Reddy
November 25th, 2011 at 7:28 pm
Dear sir/madam,
My name is Virendra Chavan. I have completed my Masters in Advanced Mechanical Engineering from University of Sussex, England. I have completed my Bachelors in Mechanical Engineering from University of Mumbai and even Diploma in Mechanical Engineering from Maharashtra State Board of Technical Edu.
In England, while doing my Masters, i chose all of my electives in Automotive subjects including Turbomachinary, Turbocharging, Automotive Engg., CFD, FEA. I have performed my project also successfully in Simulation of Hybrid vehicle.
I would like to join Volkswagen group, and as I am from Mumbai, would love to work for Volkswagen India. Its always been my passionated dream to work in Automobile sectors, work with vehicles, engines.
Please kindly reply me back so that I can send you email attaching my resume to your respective email ID.
Regards,
Virendra Chavan.
+447411771391
+447404670185
November 27th, 2011 at 7:12 pm
respected sir. im intrested in working in volkswagen ill be feel proud to work in volkswagen im diploma in mech
December 1st, 2011 at 1:45 pm
TEJAS SURATI
B.E Production
Email: tejassurati@gmail.com
8866126826
OBJECTIVE
To work in a challenging & growth oriented environment so as to apply my technical and analytical skills for the benefit of both, the organization and myself.
EDUCATIONAL QUALIFICATIONS
Course Board /
University Institution/
School/college Percentage(%) Remarks Year of passing
10th std. Gujarat Secondary and Higher Secondary Education board Swaminarayan Higher School, Maninagar,
Ahmadabad- 73.26 Distinction April 2005
Sem. %
I 69.83 First Class 2006
II 76.09 First Class 2006
III 78.27 Distinction 2007
IV 80.27 Distinction 2007
V 80.00 Distinction 2008
VI 79.73 Distinction 2008
VII 70.00 First Class 2009
VIII 70.00 First Class 2009
III 7.2(SPI) First Class 2010
IV 6.4(SPI) First Class 2010
V 7.0(SPI) First Class 2011
VI 7.4(SPI) First class 2011
SOFTWARE & TOOL DESIGN KNOWLEDGE
Software knowledge:-
Unigrafix .(UG NX-4)
Master Cam.
Auto CAD.
Mechanical Desktop.
Tool Design:
Jigs & Fixtures.
Press Tools.
Plastic Moulds.
Die Casting Dies.
Forging Die Design.
Computer Knowledge:
MS office.
Internet.
EXPERIENCE
As an Implant Trainee for 1 year in IGTR Ahmedabad.
Work done during Training in I.G.T.R.
Design department.
Conventional department
C.N.C department.
Injection molding department.
Assembly department.
Ø I did Assembly of Blanking Tool of Siemens company from Germany.
Ø I also did the work in Brahma industries (model & mould design) at Ahmadabad as a Design engineer.
Ø I took training in Brahma industries from 5th June to 5th July 2011 at Ahmadabad during 6th semester of my B.E
PROJECTS
Diploma in Tool And Die Making:
Manufactured of Guide plate tool for circular blank.(III sem)
Manufactured of plug gauge.(IV sem)
Manufactured of Progressive press tool of [piercing & bending].(V sem.)
Manufactured of single cavity Mould of CD- case fully automatic.(VI sem.)
SUBJECT OF INTREST
Design department.
To Work in automobiles industry.
Machine design.
R&D on product and Product design and its assembly.
CAD –CAM & Automation.
INDUSTRIAL VISITS
COMAPANY NAME PLACE
Farromatic Machine PVT.LTD Ahmadabad
Devu Tools. Bombay
Gravy Casting. Vapi
Prince ware PVT.LTD. Bombay
I.P.C.L casting LTD. Bhavnagar
PERSONAL APPRAISAL
Father’s Name : Mr. Navinchandra Surati.
Mother’s Name : Mrs. Indiraben Surati.
Date of Birth : 17th February 1990.
Age : 21 year.
Gender : Male.
Nationality : Indian.
Permanent Address : 78,Arvind park soc, C.T.M cross road,
Amraivadi opp, sindhvai temple,
Ahmedabad.
Pin Code – 380026
Contact No. : Mobile – 9974239239 / 8866126826
Languages Known : English, Hindi And Gujarati.
HOBBIES
Watching TV.
Playing games.
To play Pool.
Listening music.
DECLARATION
I hereby declare that the information furnished above is true to the best of my knowledge and if found false, then I will abide as per rules.
Place:
Date:
( TEJAS surati )
December 3rd, 2011 at 8:08 pm
dear Sir/Mam,
REKHA.RAGHASHETTY
Contact No: 08007910461,08888890566, 09860564614
Email ID: rekha292003@gmail.com
Carrier Objectives
“LEARNING THROUGH EXPERIENCE…..AND STRIVING FOR EXCELLENCE”
Contribute myself with creative solutions for development in SAP to cope-up with the latest technologies and widening the spectrum of my knowledge and overall performance of the organization.
SKILLS SUMMARY
Language : C, C++, Java,VB .NET 2003
Packages : Turbo C
Operating Systems : MS-DOS, Windows 98/XP/2000
Office automation tools : MS Office
Microprocessor : 8085, 8086
Application : SAP(Materials Management)
EDUCATION QUALIFICATIONS:
Qualification University College Percentage Year of Passing
B.E (CSE) VTU
Belgaum Hirasugar Institute of Technology Nidasoshi 67% 2007
10+2 CBSE
Bangur Nagar Composite Junior College,Dandeli 74.50% 2003
10 th CBSE
Janata Vidyalaya,Dandeli 88.00% 2001
Professional Summary
• 2.6 yrs of functional experience in SAP-MM with basic CIN.
• Very good logical skills suitable for process Design, Development, End-user and support.
• Excellent communication and presentation skills and customer oriented attitude.
• Good experience in Preparation of Functional Specification and end user training Documents.
• Good team player, able to interact with the client and know the exact requirements, can work individually as well as in team, capable to work on any project as and when the requirement comes, hard working, and enthusiastic.
Experience and Expertise
• Functional Experience of SAP (MM) Module like Preparation of Purchase order using Transaction Code ME21N, ME29N.
• Functional Experience in SAP (MM) Module like Other Goods Issue & Receipt by using Transaction code MB1A & MB1C with movement type 261, 561.
• Functional Experience of SAP(MM)Module like Transfer Posting Inventory Management Using Transaction Code MB1B for movement type 201, 201 k, 311,351,413.
• Functional Experience of SAP(MM)Module like Preparation of STO(Stock Transport Order)
• Functional Experience of SAP (MM) Module like work out of MIGO (Receiving of Materials).
• Integration with FI and SD with Transaction code VKOA.
1) SAP-FUNCTIONAL MODULES
• Functional Experience of SAP-MM Module like Preparation of Purchase order using Transaction Code ME21N, ME29N, and Goods Issue & Receipt by using Transaction code MB1A & MB1C with movement type 261, 561.
• Functional Knowledge in SAP-MM Module like Transfer Posting Inventory Management. Using Transaction Code MB1B for movement type 201, 201 K, 311,351,413 and Preparation of STO (Stock Transport Order), work out of MIGO (Receiving of Materials).
• Pricing (Condition tables, Access sequence, Condition types, pricing procedure, Procedure determination, Condition records).
• Integration with FI and SD with Transaction code VKOA.
Experience Summary
Dates Organization Role
April 2007 – April 2009 Vitallink Corp Ltd Research Analyst
Apr 2009 – Feb 2011 Logical Systems,Bangalore Junior Executive Engineer
Feb 2011- Present Sona Alloys Pvt Ltd, Lonand, Satara SAP Consultant(Core Team)
EXPERIENCE SUMMARY
Name : Vital Link Corp Pvt Ltd
Location: Pune
Duration: 2 Years (April 2007 – April 2009)
Nature of work: Research Analyst
Project 1: Shop Local(UK Project)
Project 2: Crime Report(US Project)
TECHNICAL KNOWLEDGE:
? Work on DBMS, SQL server, VB. NET , C#, HTML, SAP(MM), Unix
? Good knowledge of Form development in .NET and different Phases of forms.
? Projects Worked are Shop Local and Crime Report.
? Role: Development of forms and data collection.
? Research on data collection
SAP Internal Project Experience
Client JMT Auto Ltd
Industry Auto Component Manufacturers.
Tenure Apr 2009 – Feb 2011
Role Junior Executive Engineer (Support Consultant).
Vendor LOGICA SYSTEMS, Bangalore
Responsibilities 1. Knowledge of configuration SAP MM in implementation of the project.
2. Integration testing with MM, QM and FI. Testing on various reports and scenario in SAP MM and QM with the help of test cases.
3 Provided support to the end-users
4 Provided training on SAP QM, MM and Solution Manager.
CURRENT EXPERIENCE:
Name : Sona Alloys Pvt Ltd
Location: Lonand, Khandala
Duration: Feb 2011- Till Date
Nature of work: SAP Consultant(Core Team)
? Responsibilities
? Impart knowledge about the companies processes to the SAP Consultants
? Preparation of AS-IS documentation
? Handling customization, configuration, and enhancement related issues
? Configuration for Master data, which includes Vendor master, Material master, Source List and Info Record.
? Configuration of Material types, Valuation classes and automatic account assignment settings.
? Configuration of document types and number ranges for PR, RFQ, PO Quantity contracts, Value contracts and scheduling Agreements.
? Configuration of calculation schema for Local vendors and Imports pricing procedure with necessary condition types, access sequences and condition tables.
? Subcontract order processing.
? Training the core team members in the preparation of MM master data for materials, vendors, Info records, and conditions
Project Works:
Curriculum project :
Linux Shell
Graphics Editor
Final project : ePay@ATM (Sponsored By KSCST)
ABSTRACT:
Today there are several ATM centers providing 24hrs and 365 days services. The software is a simulation of ATM center, where users can directly make money transactions using their ATM cards and pay BSNL bills and LIC premiums easily at a touch of a buttons.
Objectives:
• User authentication and validation.
• Enquiry of pending bills, premium info.
• Paying BSNL bill at ATM.
Paying LIC premium at ATM.A user-friendly system to make his or her job easier.
PERSONAL INFORMATION
Name : REKHA. RAGHASHETTY
Father’s name : Shri DEEPAK.RAGHASHETTY
Date of Birth : 29th Oct 1985
Nationality : Indian.
Sex : Female.
Marital Status : Unmarried.
Languages Known : English, Hindi, Kannada., MarathiPermanent Address : C/o Shri. D.S.Raghashetty
New D.R.T Bangurnagar Dandeli Taluk:Haliyal
Dist: Uttar Kannada
Contact no : 08888890566, 08007910461, 09860564614
I declare that the information given above is true to the best of my knowledge.
Rekha.Raghashetty
December 11th, 2011 at 2:30 pm
CURRICULUM VITAE
PRASHANT P. WAGH
GURUDWAR COLONY,
NEAR RLW STATION,
AKURDI.
PUNE-411033
MAHARASHTRA Email: prashant.wagh50@gmail.COM Mobile No.: +91-9423952324
CARRIER OBJECTIVE:-
To work hard, sincerely and dedicatedly building a symbiotic relationship with the
organization where my efforts will be complemented by career growth, higher degree of responsibility and to prove myself as an asset to the organization.
PROJECT
•Final Year Project On “AUTOMATIC WATER LEVEL CONTROL”
TECHNICAL SKILLS:-
•Knowledge Of Electricals.
ACADEMIC PROFILE:-
Completed D.E.E from GOVERNMENT POLYTECHNIC,NAGEWADI,JALNA, affiliated to M.S.B.T.E
Course University/Board Year % Grade
D.E.E JALNA 2010-11 61.35 First Class
H.S.C. NASIK Board Feb2006 58.56 Second Class
S.S.C. NASIK Board Mar 2004 63.50 First Class
EXTRA ACTIVITIES:-
• AUTOMATION COURSEs:-
• PLC Modules:-
1. ALLEN BRADLEY PLC
• Programming Software- RS Logix 500
• Hardware- Micrologix 1000 & SLC 5/03
2. SIEMEN’S PLC
• Programming Software- S7-SIMATIC MANAGER
• Hardware- S7-300
• SCADA :-
• Programming Software- WONDERWARE IN TOUCH
• GRAPHICS DESIGNING AND SCRIPTING
• PLC TO SCADA COMMUNICATION
OTHER COURSE DETAILS :-
• AUTOCAD
• MS-CIT
PERSONAL DETAILS:-
Name:- Wagh prashant prakash
E-Mail:- Prashant.wagh50@gmail.com
Mobile Number:- +91-9423952324
Date Of Birth:- 24 feb, 1989
Sex:- Male
Marital Status:-Single
Languages Known;-English, Hindi and Marathi
Nationality:- Indian
Permant Address :-28,shiv colony, balad raod , Bhadgaon
Dist-Jalgaon 424105
State: Maharashtra
¬
DECLARATION
I, hereby, declare that the information given above is true to the best of my knowledge.
Yours sincerely,
WAGH PRASHANT P.
December 12th, 2011 at 4:18 pm
Divorce Solicitor Campbelltown…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
December 13th, 2011 at 7:13 pm
mini cooper s r53…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
December 15th, 2011 at 5:35 am
CURRICULM VITAE
Present address:-
Sec 10A House No. 1748
Second Floor Urban State
Gurgaon Haryana- 122001
Contact No. 9910379517
Email ID-manoj_singh74@yahoo.com
MANOJ KUMAR
CAREER OBJECTIVE :-
Aspire to work with an organization where the environment fosters continual learning
And where I can prove my ability and skills to give a prolific out come to the Organization.
ACADEMIC QUALIFICATION:-
? High school Passed from Uttar Pradesh. Board. Allahabad.
? Intermediate Passed from Uttar Pradesh Board Allahabad.
TECHNICAL QUALIFICATION:-
? Three Years diploma in Mechanical Engineering with specialization in production
Engg, from Institute of Engineering & Rural Technology (I.E.R.T.) Allahabad (U.P.) in the
Year 2006 with 73%
? B-Tech. in Mechanical Engineering from Rajasthan vidyapeeth (Deemed) university. In the year 2010 with 68%.
? Basic knowledge of computer
PREVIOUS EMPLOYER:-
The QH TALBROS is an ISO/TS – 16949: 2002 & ISO 14001:2004 certified company in technical collaboration with Quintion Hazell, UK & Nakata (Brazil). The QHT is engaged in the manufacturing of the self lubricated steering & susspension componentAnd is the OEM supplier of Maruti , TATA Motors , Eicher Motors, Mahindra & Mahindra, Tafe Tractor, Eicher Tractor , Force Motors etc. & replacements suppliers to UK & USA.
PRODUCTS-
Control Arms
Rack Ends
Linkage Assemblies
Ball suspension joints
Stabilizers Bars
Tie Rod Assemblies
WORKING STATUS:-
? Working as Production Engg. with M/s QH Talbros ltd. Gurgaon from 01 june 2006 to 30 oct 2010 date.
JOB RESPONSBILITY:-
? Working as a Production Engineer in Assembly shop.
? Working on the daily bases assembly plan.
? Manpower handling
? Knowledge of TRM Machine, PDT Machine, Drill Machine,Press Machine, SPM machine
? We are also involve in TPM Activity for improve the productivity,zero Acsident, zero maintainace,safety.
? Team member of Education and Training.
? Our team are countinue working in Kaizen Activity and Poka Yoka
? We are First Priorty to maintained 5S in the our working area.
PRESENT EMPLOYER:-
? Working with ASK AUTOMOTIVE Pvt. Ltd. as a Engineer (Engineering). The Company is manufacturing casting & machining components for HMSI,HHML,SMIPL, KINETIC MOTORS, YAHAMA,MAGNETI MARELLI, MITSUBA & RUBITECH such as Panel Assembly,Hub,Wheel assembly, Brake Shoe & other Casting parts. The company is certified to ISO/TS 16949 & OHSAS 18001 standards by UL.The Company has a technical collaboration with ASK TECHNICA CORPORATION JAPAN
PRODUCTS-
? Prececious machining parts.
? Brake shoe.
? Die casting parts.
? Pannel assembly.
WORKING STATUS:-
? Working as Sr. Engg. production. with M/s ASK AUTOMOTIVE (P) LTD.IMT Manesar gurgaon (Haryana) from 01OCT 2010 to till date.
JOB RESPONSBILITY:-
? Working as a Sr. Engineer Production.
? Working on the daily bases productin plan.
? Manpower handling.
? Involved in New Part development.
? Machine capability study, cycle time study for increasing line efficiency
? Feasibility study for development of new product
? Responsible for successful trial of new fixture & gauges.
? Problem analysis & solving during product development
? Performing mistake proofing (poka-yoka) & kaizen activities
Product & Process Audits
? Project in charge of Case Mission Cell responsible for complete manufacturing process regarding product & its documentation
? Responsible for all 5S activities in my zone as well as in company as zone leader
STRENGTH:-
? Optimistic Nature
? Confident
? Easy to Learn
SALARY CTC:- 35000/- Per month
SALARY EXPECTED:- Negotiable
PERSONAL PROFILE:
Father’s Name : Sri Sangam Lal
Date of Birth : 20th May 1981
Permanent Address : 411 .O .H. Railway Colony South Road , Allahabad- 211001 (U.P.)
Nationality : Indian
Sex : male
Marital Status : Single
Language Known : Hindi & English
Date………………
Place……………… (MANOJ KUMAR)
December 22nd, 2011 at 7:42 pm
pls. call me
December 22nd, 2011 at 7:43 pm
I am very much need of job.
December 23rd, 2011 at 6:41 pm
west gate autobus…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
December 27th, 2011 at 4:50 pm
Educational jobs genuine jobs…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 3rd, 2012 at 11:28 am
Respected sir/ madam, I am a fresher chemical engg. from pune university passed out in august 2011 with distinction. If u hv any vacancy for trainee, Plz contact me. my contact no. is 9970618617. 1
January 6th, 2012 at 6:57 am
IT Support for small Businesses in Maidenhead…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 6th, 2012 at 3:04 pm
dubrovnik…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 6th, 2012 at 6:09 pm
Objective
To achieve the position of Production officer in a Hi-tech and advanced machining unit of a Big Corporate.
Qualification
BBA from S.D.College, Chandigarh - 71% aggre
12th commerce, GMSSS-19 - 84%
Live Project Undertaken
- Analysis done on the working of – ‘Letter of Credit’ for import and export in Bhushan Power & Steel Ltd.
Period – 8 weeks.
Professional Experience
Worked as assistant to the factory manager in ‘Walia Industries’ for 4 months. Walia industries is an ancillary unit of SML Isuzu ltd. They manufacture automobile components (Fabricating & machining unit).
Interested Areas
Science & Technology
Research & Development
Operate the most advanced machines of the world
Innovating new ideas
Key Skills
Planning & Organising
Team work and people management
Supervision & monitoring
Improving Productivity
Research & Development
Analytical reasoning
Logical reasoning
Intellectual abilities
Communication skills
Customer Interaction
Computer Skills
Microsoft office
Blogging
Online Brand & Product Promotion
Strengths
Optimistic
Good Observer
Good Listener
Hobbies
Novel Reading
Swimming
Badminton
Singing
Extra Curricular Activities
1st Prize in Creative Thinking, Management games held in S.D.College, BBA Final year-2010.
2nd Prize in Project Development, Management games, S.D.College.
Various Crafts and painting competitions in 12th class.
Leading role of a Politician in a play in 11th class.
Voluntary Activities
Organised a ‘Tree Plantation event’ on 15th august with an NGO –
“Shah Satnam Ji Green S Welfare Force Wing”.
Organised a ‘Blood Donation Camp’ in collaboration with same NGO on 8th July.
Language Known
English
Hindi
I wanna say something
I am not from technical Background, but a management BOy. Due to some circumstances, i wasn’t able to do Engineering. BUt i have serious interest in Science & technology, and i want to make my Career in that Stream only. I hope this world will give me a fair chance to perform and show my ability.
Thankyou for reading me….!!
I, Sanjeev Garg hereby declare that above information is true and correct to best of my knowledge.
SANJEEV GARG
January 10th, 2012 at 11:52 pm
dubai jobs…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 11th, 2012 at 9:51 am
Ukash Kart Alman?n En h?zl? ve Güvenli Yolu…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 13th, 2012 at 12:13 pm
SANTOSH T. ADHALI
Contacts: +91 9923881282; ~ E-Mail: santoshadhali123@gmail.com
Seeking assignments in DEVELOPMENT or PRODUCTION with growth oriented organization
PROFESSIONAL SYNOPSIS
? Diploma in Mechanical Engineering with qualitative experience of over 8 years in Production, Development, Design & maintenance.
? Worked on product Development & Fixture Designing Ensuring compliance with Quality standards.
? Sound knowledge of AutoCAD, Sap pp Module, Microsoft Excle, World.
? Sound knowledge of Welding, Fabrication & Plasma cutting, process.
? Effective communicator with honed analytical, problem solving & organisational abilities.
FUNCTIONAL SKILLS
? Product Development & Improvement: Handling the entire product development including requirement analysis, finalizing specifications, designing, prototype development and testing activities. Facilitating new product development initiative with key focus on quality, cost & delivery; developing components in conformance to pre-set technical specifications.
? Design & Development: Gathering the product specifications & designing and modifying / upgrading existing designs using specialized software. Providing design support to new product & introduction of products. Getting approvals for prototype, making necessary modifications and releasing for production.
? Operations Management: Preparing technical specifications including BOM, Tool List Bill of Materials, resource & task scheduling and resource deployment for meeting the project deadlines. Adhering to quality standards, implementing stringent QC systems to enhance quality of products and reduce rejection level.
Project Management: Coordinating the project activities and drawing specifications with the clients to ensure drawings are per the specifications of clients. Providing sound technical inputs & engineering support to the team from conception to completion stage of the product. Helping vendors to extend their capabilities through technical support and attain desired quality / production schedule.
CAREER HIGHLIGHTS
June ’2007 – Till Date. AUTOMOBAILE CORPORATION OF GOA LTD.
Production Engineer / Line In charge
An ISO 9001:2000/TS 16949 Certified company. ACGL is a joint venture of Tata motors- India and Economic Development Corporation of Goa Limited, technically collaborated with Fuji Heavy Industries- Japan and manufacturing of automotive sheet metal components and different type of buses. Total Turnover is 650 Cr. (Approx)
Key Deliverables:
1) Structural Fixtures designed & production started.
2) Line set up of Hispano bus project done.
3) Line balancing stage wise done to achieve productivity.
4) Cost reduction done in material & consumables of bus.
5) Member of kaizen team to improve tact time of stages of bus.
6) Stage wise standard process sheet developed.
7) New bus model developed based on Hispano standards.
Current Job Function: -
PRODUCTION DEPARTMENT
• Internal production planning & shop floor supervision.
-Planning of material/productivity as per monthly schedule.
• Monitoring processes and doing process studies.
-After doing process-study improving efficiency which ultimately
Improves productivity.
• Manpower management.
-Effective utilization of man power by engaging them in both
Inline and offline activities.
• Investigating and implementation of corrective and preventive action on customer complaints.
• Development and modification of processes wherever required to
Achieve quality.
• Implementation of TS-16949 system.
• Monitoring of manufacturing activities & assuring on time delivery.
• Assuring quality of a product.
• Improvements to reduce cost involved in processes.
• On job training to sub-ordinates on various aspects such as quality improvement, system follow-up, safety etc.
• Line improvement to increase Productivity, Quality and Safety.
Achieving daily production target
Responsibility Handled:
? Development & product ionised new product
? Monthly & weekly production plan based on customer requirement.
? Analysis monthly delivery against customer requirement.
? Manpower planning based on production load.
? Organise training as per the standards’ & quality requirement.
? Handled customer complaint with corrective & preventive action plan & resolved.
? Regular communication with customer for Development, Delivery & quality requirement.
Jan ’03 – May ’07 CIPLA LTD.GOA
MAINTENANCE ENGG.
Key Deliverables:
Expertise in production System:
Activity Planning.
Planning of Manpower & activity to achieve given task.
Total productive Maintenance (TPM)
Corrective Action/Preventive Action,
EDUCATIONAL CREDENTIALS
2002 Diploma in Mechanical Engineering from K.L.E, S C.B. KORE Polytechnic, Chikodi, Board of Karnataka. Secured 50 %.
TECHNICAL OVERVIEW
? Well versed with:
- MS Office, Computer Hardware & Software concepts.
- Windows (XP, 2000 & 98) platforms.
- Sap PP Module End user.
-
BEYOND CURRICULUM
? Actively represented the:
- General Championship & best boy achieved in the high school.
- I was between 1st & 2nd rank form fifth to tenth class.
- Achieved Certificate B In NCC as well drawing competition in Collage.
PERSONAL OUTLINE
Date of Birth : 31ST May 1982
Nationality : Indian
Marital Status : Married
No. of Dependants : 3
Driving License Details : Holds Indian LMV license
Languages : English, Hindi, Marathi, Konkani & Kannada.
Permanent Address : Near Gram Panchyat, At. Po. Malgaon, 416407 .Sangli, Maharastra. India.
Reference : On Request
January 13th, 2012 at 2:25 pm
máy ch?m công, may cham cong…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 13th, 2012 at 5:07 pm
manual de calidad, manual iso 9001 , certificacion iso 9001 , lista de verificacion…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 15th, 2012 at 6:45 am
Ford…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 17th, 2012 at 4:15 am
crochet…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 17th, 2012 at 9:06 am
energy equipment…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 17th, 2012 at 10:48 am
ofertas iphone4 , manual iphone4 ,precio iphone4,carcasa iphone4, trucos iphone4, iphone precio…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 18th, 2012 at 9:50 am
how to root droid x2…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 18th, 2012 at 6:52 pm
Masita sportartikelen…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 19th, 2012 at 4:04 pm
jewellery…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 20th, 2012 at 10:12 am
cheap tyres glasgow…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 20th, 2012 at 11:28 am
infidelity…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 22nd, 2012 at 7:25 pm
chicago resume service…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 22nd, 2012 at 10:43 pm
Free Operating System…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 23rd, 2012 at 6:02 pm
hoc marketing…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 24th, 2012 at 11:52 pm
we specialize in repair and maintenance on all Spa and Sauna brands available today…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 25th, 2012 at 5:22 am
ipad…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
January 29th, 2012 at 8:24 pm
google seo services…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
February 12th, 2012 at 9:52 pm
SUSHILKUMAR N YADAV
Email: sushil.mba.operations@gmail.com Phone: (M) +91 9158922420
~ PROCUREMENT / MATERIAL MANAGEMENT / SUPPLY CHAIN / PRODUCTION PLANNING~
To work in an organization where I am able to contribute to the organization’s growth and profitability with my skill and in turn get an opportunity to gain exposure and expertise that would help me build a strong and successful career
SYNOPSIS
? Young, energetic and result-oriented professional offering 3.7 years of experience in Procurement, Purchase, Supply Chain Management, Sourcing Vendors and Business Development.
? Expertise in formulating sourcing strategies, vendor identification and development, supply chain management and analytical assessment for various materials.
? A strategic planner with expertise in implementing cost saving measures to achieve reduction in terms of raw material, procurement costs, and logistics cost.
? Skilled in selecting and negotiating with suppliers on the basis of quality, timely supply and credit terms etc.
? Effective communicator & team leader with strong analytical, problem solving & organizational abilities and proven track record of forging business partnerships
? Strong business acumen to maintain high quality standards to meet challenges of this fast paced industry.
? Adept at working in high pressure environments with strict deadlines and multiple deliverables to implement best practices that consistently deliver outstanding results.
? Dedicated and highly ambitious to achieve personal as well as organizational goals.
? Ability to build new territories and expand opportunities towards the achievement of stated targets.
CAREER RELATED SKILLS
? Purchasing & Procurement
? Supply Chain Management
? Material Management
? ERP
? Production
? Sourcing Vendors
? Vendor Development
? Negotiation Ability
? Cost Saving
? Planning & Organizing
? Business Development
? Production Planning
EDUCATIONAL CREDENTIALS
? MMS/MBA (Operations) Full time from Mumbai University in 2012 with 70%
? BE (Instrumentation Engineering) from Mumbai University in 2006 with 73%
? 12th in 2002 with 75%
? 10th in 2000 with 79%
COMPUTER PROFICIENCY
? SAP MM, MS Office, Operating Systems, Hardware (Installation & Maintenance)
SUMMER INTERNSHIP
GLOBAL TOWERS LIMITED, Mahape, Mumbai
Project: Supply Chain Management
EXECUTIVE HIGHLIGHTS
MAHARASHTRA STATE POWER GENERATION COMPANY LTD
? Efficiently reduced procurement process time up to 50% .
? Recognized as Best Team Leader in the Unit.
? Saved money up to 25% by strong negotiation procedure.
? Recommended for important and influential projects.
? Selected as Professional Trainer for new recruiters.
? Was part of team, who achieved more than 100% capacity utilization.
INDIA WIRELESS TECHNOLOGY LTD
? Appreciated by seniors for doing multitasking such as handling IT related activities along with regular work.
? Completed schedule contract with HZL, which saved 15% cost.
? Searched and developed 3 new vendors for raw materials.
PROFESSIONAL BACKGROUND
MAHARASHTRA STATE POWER GENERATION COMPANY LTD, Mumbai (Jun’07 – Aug’10)
Junior Engineer (Reporting to General Manager)
Key Responsibilities:
? Instrumental in procurement of various materials, equipments used in power plant, consumable goods, stationary items and various services like transport, manpower, IT products etc.
? Ensured all purchases are approved within mandated guidelines.
? Efficiently prepared comparison sheet of received quotations by considering rate, terms and conditions,
? Involved in the preparation and follow up of Purchase orders with SAP MM.
? Responsible for vendor selection and negotiation based on comparison and history data of vendor.
? Actively participated in vendor development and evaluation of vendor.
? Processed GRN (Goods Received Note) and arranged payment to suppliers.
? Accountable for invoice verification with comparison of Receipt of goods and Purchase order.
? Reviewed stock purchase by monitoring current stock levels, lead time required for manufacturing.
? Assisted in the training of new purchasing staff.
INDIA WIRELESS TECHNOLOGY LTD, Mumbai (Feb’07 – Jun’07)
Junior Executive (Reporting to Head Supply Chain Management)
Key Responsibilities:
? Procured various raw materials like Steel, Zinc etc. Various Equipments like machinery and services like transport, manpower, IT products etc.
? Maintained all required data such as vendor data, stock data with ERP software.
? Prepared Purchase Order with Symco ERP.
? Accountable for invoice verification with comparison of Receipt of goods and Purchase order
? Carried out Material Reconciliation at subcontractor.
TRAININGS
? Completed SAP MM (Material Management) ERP training from SAPZen Consulting Pvt. Ltd., Mumbai
? Certificate Course “Diploma in Computer Peripheral Maintenance” from Reinet India Pvt. Ltd., Mumbai
? Completed 8 Days training of Programming of Metso Automation’s MaxDNA DCS, USA
PERSONAL DETAILS
Born on 18th May, 1985
Fluent in English, Hindi, Marathi
Reference: Available upon request
February 20th, 2012 at 6:42 am
ukash kart…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
February 28th, 2012 at 6:44 am
leader…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
February 28th, 2012 at 9:11 am
Tempat mencari segala sesuatu yang murah…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
March 1st, 2012 at 2:48 pm
Rajesh Shet
Date of Birth: 25 / 02/1974 Address: C/o Peter d, souze
H.no. 164/1
Church Street
Chavder Nautha
Cortalim, Goa.
Premanent Address: C/o Vinod B Raikar
“Saiprakash” House Near Saneamma Temple Haleherwatta,
Kumta,Karwar Karnataka
Sub:-Application for the post of Maintenance Engineer
Qualification: Diploma in Mechanical Engineering
Current Position: Maintenance Engineer, Goa
E-mail: shetrajesh@yahoo.com Mobile: 09923277816
Objective
I intend to build a career with leading organization with committed and dedicated people.
If given an opportunity to serve in your esteemed organization, I assure you of my sincere and best efforts in discharging the duties assigned to me to the best of my ability and to the utmost satisfaction of my superiors.
Profile
Working with Andrew Telecommunication (India) Pvt Ltd from 20/11/2003 to till date.
• Strong communication, aptitude, Managerial and analytical skills
• Languages Known: Konkani, Kannada, Hindi, English.
WORK EXPERIENCE:
Total Work Experience: 10+ years.
1. Andrew Telecommunication (India) Pvt Ltd
Verna Industrial Estate,
Verna, Goa
Job Profile : (20/11/03 to till date)
• Maintenance Engineer
Job Description:
? Maintenance of five axis CNC Multispindle & Multiturret Lathe (Traub make TNS60,TNC65,TNS26,TNC30)
? Maintenance of five axis CNC Lathe (Citizen make L-25)
? Installation of Machines, Turret Alignment, Spindle alignment, Bar Feeder alignment etc.
? Changing spindle Drives, Axis Drives, Power supplies cards, Control Cards, Reference cards, NC Cards like CPU, Input Output cards , Axis Processor, Communication processor, EPROMS, Contactors, IGBTs, Batteries, Convertors, Motors, Motor Cables, Servo Motor Encoders, Angle Encoders,(Speed) Rotary Encoders, C axis Encoder, Proximity Switches, Relays, Servo Motors, Pressure Switches, Hydraulic filters, Timing Belts, V-Belts, Angular contact Bearings, Ball screw, Needle bearings, Roller bearings ,Leaner Motion guidways, Direction control Valves ,Accumulator & Overload clutches etc .
? Initialization of CNC system, Loading & Down loading of Parameters, Machining Programs, Tool parameters. Fixed cycles, Macros (Sub routines& Traub cycles.
? Bypassing of axis drives, Spindle drives ,Encoders, for checking purpose(Open loop)
? Checking PLC Inputs, Outputs, Backlash & Repeatability of the axis etc
? Changing Parameter according to requirements
? Repairing of Panel ACs
? Machining Programming & Setups
? Planning of Preventive Maintenance
? Ordering the Spare parts & Maintaining Records etc.
? Making Machine down time report, Maintenance expenditure
Maintenance budget, Break down maintenance Report, & Preventive
Maintenance report.
? Problem shooting of breakdown(why why analysis to find out exact root cause of break down)
? Implementing the 5S & Keizen activities.
2. Aytida Tools Pvt, Ltd.
Kundaim Goa
Job Profile: (17/05/1999 to 17/11/2003)
• CNC SHIFT ENGINEER
Job Description:
? Manufacturing & regrinding of Solid Carbide Cutting Tools Like End mill, Ball Nose End Mill (Standard & Taper) Drills, Reamers, Form Tools, Burnishing Dills etc .on CNC Tool & Cutter Grinder (Walter HMC 500)
? Experience on the Centerless Grinding Machine Ewag & Universal Tool & Cutter Machine.
? Production Planning, Control & Maintenance of CNC Machine
3. Leo Circuits Boards Pvt Ltd
Turbhe –New Mumbai
Job Profile: (17/01/1998 to 12/05/1999)
• CNC SUPERVISOR
Job Description:
? Manufacturing of circuit Boards (PCB) Single sided & double sided .Drilling on CNC Driller (Excellon)&Experience on Micromat Machine
? Production Planning & Control
? Maintenance of CNC Driller & Daily Maintaining Records
4. Divgi Metal Wares Ltd
Sirsi Karnataka
Job Profile: (01/01/1996 to 31/12/1997)
• DIPLOMA ENGINEER
Job Description:
? Manufacturing of Gears
? Programming & Setting of CNC lathe & MNC (HMT & Technofor)
ACADEMICS:
? Diploma in Mechanical Engineer from, C.B. Kolli Polytechnic Haveri Karnataka State.
? SSLC from, MHS Haveri , Karnataka State
EXTRA CURRICULAR ACTIVITIES:
? Attended Training on Programming & Maintenance of CNC machine.
? Attended Training at China on Citizen Machine
? Attended Training on 5S
? Attended Training on First aid
COMPUTER SKILLS:
? Operating Systems: Windows 98/2000/XP, MS Office
? SAP
DECLARATION:
I hereby declare that the information given above is true to the best of my knowledge.
Date: Rajesh Shet
March 4th, 2012 at 7:51 pm
Vrishali Baban Sawale
Mob. – 9545301660, 9420479735 Mail ID: sawalevrishali@gmail.com
Synopsis
? B.E (Mechanical) from Cummins College of Engineering for Women, Pune
? International internship at AUTOMOTIVE INTELLIGENCE CENTRE,BILBAO SPAIN and CIKAUTXO S.COOP, BERRIATUA,SPAIN.
? An enthusiastic self starter with strong leadership and communicative skills.
? Proven academic and curricular achievements , and have the right technical and soft skills required to propel the organization towards achieving its goals and objectives.
? Acquires practical knowledge through various trainings & academics projects.
? Keen learner with constant zest to acquire new skills and work for challenging tasks.
? Team player with strong analytical & leadership skills.
Educational Qualification
Sr. No. Exam Name of Institute Board / University Marks Obtained (%) Year of Passing
1. BE CUMMINS COLLEGE OF ENGINEERING FOR WOMEN.
Pune University.
61.53 2011
2. XIIth Fergusson College Maharashtra Board 73.16 2007
3. XTh
R & D (E) High school Maharashtra Board 88.66 2005
Academic Internships and Projects
• Seminar: Technical Paper Presentation on Digital Fuel Indicator.
• Project Work: Has successfully completed the B.E. project – “Thermal Analysis of Disk Brakes of an External Braking System” with DRDO’s Research and Development Establishment (Engrs). In this work, the temperature distribution in brakes of an aircraft arrester gear during a braking cycle were predicted using Finite Element Analysis (FEA) software, ANSYS.
• Internship :
1) Has completed a 10 days training at the Automotive Intelligence Centre, Bilbao, Spain about automobile components and their functions, polymers and Kaizen training.
2) Has successfully completed a 3 month internship in Cikautxo S. Coop., Berriatua, Spain where I was trained in the Extrusion and vulcanization department.
Cikautxo S. Coop. develops and manufactures parts and assemblies in various polymers for diverse applications. Cikautxo S.Coop. mainly deals with rubber and rubber components for Automobiles and domestic Appliances.
Professional Experience
Cikautxo-Taurus Flexibles Private Limited
From Feb 2012 to present, working with Cikautxo Taurus Flexibles Private Limited, Pune as PROCESS ENGINEER.
Responsible for:
? Making trials for new parts to be manufactured.
? Validating the processes for the parts manufactured per month.
? Making process sheets and technical sheets for the extrusion and vulcanization processes.
? Controlling and recording the parameters of the extrusion line.
? Time study & Video Analysis on extrusion line and vulcanization.
? Cycle time estimation for vulcanization process.
? Manpower estimation.
Additional Achievements
? Was the member of the SAE INDIA Cummins Collegiate Chapter. This chapter was established in September 2010. This was the first All Girls Collegiate Chapter in India
? Helped in Organizing the first successful Technical Fest (TRIZ) under this chapter.
? Got appreciation for the successful TRIZ event
Software Skills
MS Office, Auto-CAD, PRO-E, C language, ANSYS
Training Attended
? Basic of Auto CAD
? Basic of PRO E
? Kaizen Training
Key Strength
? Interactive
? Fast Learner
? Working in team
? Innovative
? Readily accepts additional responsibilities
? Positive attitude
Personal Details
Name : – Sawale Vrishali Baban
Date of Birth : – Jan 8th 1990.
Marital Status : – Single.
Nationality : – Indian.
Gender : – Female.
Languages known : – English, Hindi & Marathi.
Permanent Address : – 169,Type III,R & D E(E) Colony, Alandi road, Kalas, Pune
411015
Contact No. : – 9545301660, 9420479735
E-mail id. : – sawalevrishali@gmail.com
I Ms. VRISHALI BABAN SAWALE, hereby declare that the above particulars are true to my knowledge & belief. I am confident about my ability to work in a team successfully.
March 12th, 2012 at 2:20 am
dubai villas…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
March 18th, 2012 at 6:59 am
Lexington Used cars…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
March 26th, 2012 at 4:09 am
online forex account…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
March 29th, 2012 at 1:35 pm
Respected sir/madam,I am a I.T.I (welder)and N.C.V.T. from New Delhi university passed out in august 2007-2008 with 1St class. If you have any vacancy for TRAINEE,Plz Contact me.My Contact No is-9623452863
April 1st, 2012 at 1:01 pm
vw car,vw gps,vw,vw player,car vw, car, car model,car radio…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
April 1st, 2012 at 2:36 pm
CURRICULAM-VITAE
ASHOK G. POPALE.
Office Mobile: +91 96577 03356 | Email:ashokpopale@yahoo.com
Objective:
Desire a challenging position as Electronics Engineer in the area of Automotive Electronics, which would enable me to utilize my interdisciplinary, technical and hardware skills in a productive, enthusiastic and team oriented environment.
Professional Snapshot :
? A result oriented professional with 4.3 years of experience in Electronics Industry. ( Production, Quality & Testing )
? Good understating of product design and development life cycle.
? Understanding of quality, customer relations
? Excellent in understanding problem statement and product development stages.
? Understating of EMI, RF testing procedure.
? Products of the company includes – AC Flashers/ DC Flashers, Regulators & Rectifiers, CDI Units, Sensors, Beepers & Buzzers
? CDI, RR Units, Flasher, Regulators, Sensors & Timers for Two & Three wheelers.
? Target and achievement oriented with an ability to take up challenges and perform in changing environments.
? Proficient in MS Windows, MS-Office and MS Outlook.
Work Experience:
R. D. Electronics. Pune – 412114.
Web site- http://www.rde-design.com
Post- Customer co-ordinator
Job Profile – Quality Assurance
[From- 1/4/2009 to till date]
M/s R D Electronic is a Automotive product based OEM company with product range in CDI, Flasher, Regulators, Timer Modem & Sensor. .The Company is mainly responsible for the production of PCB and Job worker of Electronics assembly automotive company.
Job Description:
? Knowledge of PPAP, FMEA, APQP, QCPC for the customers.
? Preparing sample inspection reports.
? Experience in the handling of oscilloscopes, multimeters, and power supplies, etc.
? Preparing QCPC reports
? Keeping record of jobs being completed and preparing weekly/monthly reports.
? Attend customer & vendors meetings to gather requirement & quality defect.
? Working on DOL Activities
? Handle Multimeter, power supplier instrument
? To work on assembly components as per Design inputs.
? To understand drawings, schedule work force and monitor progress on shift-wise basis
? To effectively contribute to the overall team / company targets
? Monitoring the day to day quality documents and cc.
? Preparing CAPA & 6W2H, 8D Format for complaints
? Keeping record of work executed under supervision on day-to-day basis.
? Problem solving skills with an ability to research, analyze and find solutions independently
? Identify & decided the requirement of the inspection process per product.
? Control of rejection on the shop floor.
? Fault finding.
? Maintaining the I.S.O. documents related to the mfg process.
? Working on T.P.M.
? Working on job costing.
Responsibilities :
? Verification of new products.
? Prepare Test certificate.
? Conduct & face ISO 9001-2008 audits.
? Product sales and costing per month
? Authorized for all necessary action with regard to customer satisfaction
? Authoris signature for all subsidiary challan and invoice challan.
Key Skills:
C, C++,
PLC: Done a professional course in PLC, SCADA from KRISH InfoTech, Chinchwade Pune
PLC Company: ALLEN Bradly
Model name: Micrologix 1000[Analog/ Digital]
Programming Softwere : R S Logix 500
Communication: RS 232 cable
Educational Details:
Education: B.E. in Electronics & Telecommunication in 2007 From, Dr. B.A.M.U, Aurangabad.
Examination University / Board Percentage Class / Division
B.E. Dr. BAMU, A’ bad 67.68% Distinction
H.S.C. Maharashtra board 70 % First
S.S.C. Maharashtra board 75.33 % Distinction
Extracurricular activities :
• Project Presentation on “Automatic Drip Irrigation control using Microcontroller 89c51” (2nd prize) at MIT college Aurangabad
• Member of technical committee during paper presentation.
• Member of annual function committee.
Personal details:
Contact Address: C/o Satich Popale,
Gurudatta complex, Near Datta Mandir
Rustan Colony, Chichwad.
Pune-411 033 (M.S.)
________________________________________
Date of birth: 01th March 1984.
________________________________________
Sex: Male.
________________________________________
Marital status: Single.
________________________________________
Language Known: English, Hindi, Marathi,
Date: / / Represented by,
Place: Mr. ASHOK G.POPALE
April 1st, 2012 at 2:37 pm
CURRICULAM-VITAE
ASHOK G. POPALE.
Office Mobile: +91 96577 03356 | Email:ashokpopale@yahoo.com
Objective:
Desire a challenging position as Electronics Engineer in the area of Automotive Electronics, which would enable me to utilize my interdisciplinary, technical and hardware skills in a productive, enthusiastic and team oriented environment.
Professional Snapshot :
? A result oriented professional with 4.3 years of experience in Electronics Industry. ( Production, Quality & Testing )
? Good understating of product design and development life cycle.
? Understanding of quality, customer relations
? Excellent in understanding problem statement and product development stages.
? Understating of EMI, RF testing procedure.
? Products of the company includes – AC Flashers/ DC Flashers, Regulators & Rectifiers, CDI Units, Sensors, Beepers & Buzzers
? CDI, RR Units, Flasher, Regulators, Sensors & Timers for Two & Three wheelers.
? Target and achievement oriented with an ability to take up challenges and perform in changing environments.
? Proficient in MS Windows, MS-Office and MS Outlook.
Work Experience:
R. D. Electronics. Pune – 412114.
Web site- http://www.rde-design.com
Post- Customer co-ordinator
Job Profile – Quality Assurance
[From- 1/4/2009 to till date]
M/s R D Electronic is a Automotive product based OEM company with product range in CDI, Flasher, Regulators, Timer Modem & Sensor. .The Company is mainly responsible for the production of PCB and Job worker of Electronics assembly automotive company.
Job Description:
? Knowledge of PPAP, FMEA, APQP, QCPC for the customers.
? Preparing sample inspection reports.
? Experience in the handling of oscilloscopes, multimeters, and power supplies, etc.
? Preparing QCPC reports
? Keeping record of jobs being completed and preparing weekly/monthly reports.
? Attend customer & vendors meetings to gather requirement & quality defect.
? Working on DOL Activities
? Handle Multimeter, power supplier instrument
? To work on assembly components as per Design inputs.
? To understand drawings, schedule work force and monitor progress on shift-wise basis
? To effectively contribute to the overall team / company targets
? Monitoring the day to day quality documents and cc.
? Preparing CAPA & 6W2H, 8D Format for complaints
? Keeping record of work executed under supervision on day-to-day basis.
? Problem solving skills with an ability to research, analyze and find solutions independently
? Identify & decided the requirement of the inspection process per product.
? Control of rejection on the shop floor.
? Fault finding.
? Maintaining the I.S.O. documents related to the mfg process.
? Working on T.P.M.
? Working on job costing.
Responsibilities :
? Verification of new products.
? Prepare Test certificate.
? Conduct & face ISO 9001-2008 audits.
? Product sales and costing per month
? Authorized for all necessary action with regard to customer satisfaction
? Authoris signature for all subsidiary challan and invoice challan.
Key Skills:
C, C++,
PLC: Done a professional course in PLC, SCADA from KRISH InfoTech, Chinchwade Pune
PLC Company: ALLEN Bradly
Model name: Micrologix 1000[Analog/ Digital]
Programming Softwere : R S Logix 500
Communication: RS 232 cable
Educational Details:
Education: B.E. in Electronics & Telecommunication in 2007 From, Dr. B.A.M.U, Aurangabad.
Examination University / Board Percentage Class / Division
B.E. Dr. BAMU, A’ bad 67.68% Distinction
H.S.C. Maharashtra board 70 % First
S.S.C. Maharashtra board 75.33 % Distinction
Extracurricular activities :
• Project Presentation on “Automatic Drip Irrigation control using Microcontroller 89c51” (2nd prize) at MIT college Aurangabad
• Member of technical committee during paper presentation.
• Member of annual function committee.
Personal details:
Contact Address: C/o Satich Popale,
Gurudatta complex, Near Datta Mandir
Rustan Colony, Chichwad.
Pune-411 033 (M.S.)
________________________________________
Date of birth: 01th March 1984.
________________________________________
Sex: Male.
________________________________________
Marital status: Single.
________________________________________
Language Known: English, Hindi, Marathi,
Date: / / Represented by,
Place: Mr. ASHOK G.POPALE
April 2nd, 2012 at 7:40 am
vw dvd,vw,vw player,vw car,vw dvd player,vw gps,vw monitors…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
April 6th, 2012 at 6:44 am
web design|????????? ???????????…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
April 8th, 2012 at 6:47 pm
taxis & private hire…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
April 11th, 2012 at 1:43 pm
tramadol…
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
April 26th, 2012 at 5:29 am
Free website directory, Web directory. Add your website into free web directory and improve your search engine ranking and search engine position….
[...]Manufacturing Jobs at Volkswagen, Pune, Jobs in Pune, Manufacturing Jobs | Top Jobs In India[...]…
September 7th, 2012 at 3:16 pm
Resp. Sir
i completed B.E. in mechanical.
i have 1 yr. exp. in production dept.
at NRB Bearings ltd.
i m interested to join our group.
Mo. 8626092840
October 29th, 2012 at 11:51 am
Resp.sir
I have completed my diploma in electronics production and maintenance from DOEACC aurangabad,and then i have completed my post diploma in mechatronics introduce by Mercedes-Benz from government poly aurangabad.
so i have good knowledge in mechatronics field
hope u come forward with positive reply..
Mo:7385589914
February 2nd, 2013 at 11:53 am
dear sir
I complited diploma in automobile ,i want to works in volkswagen,